Laguna Tools Panelsaw 220V 3Phase, P12|8 MPSP12-8-7.5HP-3PH-0135
Laguna Tools Panelsaw 220V 3Phase, P12|8 MPSP12-8-7.5HP-3PH-0135
Couldn't load pickup availability
Details
Details
MPSP12-8-7.5HP-3PH-0135, Laguna P12|8 Panelsaw 220V 3Phase
The P12|8 was designed to clear 8′. material using a 12″ blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down. The 102? sliding table is constructed of anodized aluminum. Our dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly.
Features:
- Motor: 7.5HP 3ph or 5 HP 1ph
- Voltage: 220v 60 HZ
- Blade Capacity: 12″, 14″/300mm, 355mm
- Max. Blade: 16″/400mm (minimum height when lowered: 1″/25mm)
- Max Scoring Blade: 4-3/4″/120mm
- Scoring Adjustment: T-Handle through Cast Top
- Specifications:
- Arbor: 30mm (Main), 20mm (Scoring)
- Max Cutting Height 90° 14″/355mm Blade: 4-½″/115mm
- Max Cutting Height 90° 16″/400mm Blade: 5-⅛″/130mm
- Max Cutting Height 45° 14″/355mm Blade: 2-¾″/70mm
- Max Cutting Height 45° 16″/400mm Blade: 3-½″/90mm
- Main Blade Speed: 4000 RPM
- Dust Collection Port Saw: 4-¾″ (120mm)
- Dust Collection Port Guard: 4″ (100mm)
- Sliding Table: 102.36″ (2600mm)
- Sliding Table Width: 14.88″ (387mm)
- Main Cast Table: 21-½″ x 35-¼″
- Rip Fence: 51″ (1300mm)
- Rip Fence Micro Adjust: Included
- Rip Fence Bar: 1-⅝″ (40mm) Solid Steel Micro Polished Overhead Guard With Swing Away
- Push Handle: Included
- Rip Shoe: Included
- Hold Down Clamp: Included
- 32″ x 12″ Steel Extension Table: Included
- Cross Fence: 2 x Flip-Stop
- Cross Fence Readout: Inch/Metric
- Crosscut Fence Max Collapsed: 77″
- Crosscut Fence Max Extended: 140″
- Table Lock Positions: 2 Tabs, 20 Notches = 40 Total
- Ship Dimensions Body: 83″ x 47″ x 46″
- Ship Dimensions Table: 137″ x 20″ x 15″
- Weight (Net/Ship): 1815/2112 lbs
Specifications
Specifications
| Laguna Tools Panelsaw 220V 3Phase, P12|8 MPSP12-8-7.5HP-3PH-0135 | |
| APPLICATION | Wood Working |
| Brand | Laguna Tools |
| HORSEPOWER | 7.5 HP |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL SUB-TYPE | Saws - Panel Saws |
| TOOL TYPE | Saws |
| VOLTAGE | 208V-240V 3Ph |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
