The Metabo HPT DB3DL2QLY 3.6V Cordless 1/4 in. Hex Screwdriver Kit provides controlled fastening in compact spaces where full-sized drills or impact drivers risk stripping threads and damaging delicate workpieces. Engineered for electrical installations, service calls, cabinetry hardware, HVAC access panels, and assembly benchwork, this screwdriver features an articulating two-position handle that transitions smoothly between a straight in-line grip and an ergonomic pistol-grip orientation.

A dual-speed gearbox delivers 0-260 RPM for high-torque driving control and 0-780 RPM for light drilling and rapid fastener rundown. The 21-stage adjustable clutch allows incremental torque settings from 3 to 26 in-lbs, backed by a direct drill mode that delivers up to 44 in-lbs of maximum torque. When the drive switch is released, an automatic spindle lock engages immediately, enabling manual tightening or loosening like a standard hand screwdriver.

Measuring 10.55 in. in straight alignment and weighing under one pound, the lightweight tool body reduces operator strain during repetitive overhead or long-duration assembly work. A forward-facing LED illuminates recessed electrical boxes and dark equipment interiors, while built-in electronic circuit protection defends the motor and battery pack from overload and over-discharge stress.

Features & Benefits

• Dual-Position Handle: Converts between straight in-line and pistol-grip configurations to adapt to restricted or awkward fastening locations.
• 21-Stage Adjustable Clutch: Provides 21 torque settings plus a dedicated drill mode to prevent overdriving fasteners and stripping threads in soft materials.
• Two-Speed Gearbox: Select between low speed (0-260 RPM) for controlled screwdriving and high speed (0-780 RPM) for faster drilling and rundown.
• Automatic Spindle Lock: Locks the output shaft when the trigger is released, allowing manual screw tightening or loosening without changing tools.
• 1/4 in. Quick-Change Hex Drive: Accommodates standard 1/4 in. hex driver bits for rapid bit replacement.
• Integrated LED Work Light: Casts illumination directly on the work surface for improved visibility inside dark cabinets and junction boxes.
• Electronic Circuit Protection: Monitors operation to protect the motor and battery pack from overload and over-discharge conditions.
• Compact and Lightweight: Weighs under one pound to minimize operator fatigue during repetitive assembly tasks.
• Continuous Dual-Battery Kit: Includes two 2.0 Ah lithium-ion batteries and a dedicated charger so one pack charges while the other is in use.

What's Included

• (1) DB3DL2 3.6V Cordless Screwdriver
• (2) 3.6V 2.0 Ah Lithium-Ion Batteries
• (1) Quick Charger (UC3SFL)
• (1) Double-Ended Phillips Driver Bit
• (1) Protective Carrying Case

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.