Laguna Tools Cyclone Dust Collector, 2 HP, 220V, 1 Ph, C|FLUX:II MDCCF22201
Laguna Tools Cyclone Dust Collector, 2 HP, 220V, 1 Ph, C|FLUX:II MDCCF22201
Couldn't load pickup availability
Details
Details
MDCCF22201, Laguna C|Flux:2 2hp 220v Cyclone Dust Collector
The C|Flux series sets a new standard for cyclones. The horizontal chute is designed to maximize airflow while improving CFM.
All shapes and dimensions has been reevaluated to optimize performance.
The C|Flux:2 comes standard with a 1 micron canister providing filtration of 99.97% of particles between the sizes of 0.2 to 2 micron & features 109 sq/ft. of polyester spun bond pleated filter to ensure maximum airflow. 270° manual clean comes standard.
Features:
- Motor HP: 2 HP
- Phase: 1
- Voltage: 220v
- Amps: 14 Amps
- Recommended Breaker: 20 AMP
- Hertz: 60
Specifications:
-
Plug: No
-
RPM: 3450
-
Switch Type: Radio Frequency Remote Switch – Black Box
-
Hand Held Remote: HF
-
Shop Setting CFM: 116
-
Inlet CFM: 1740
-
Max Static Pressure (Inches of Water): 9.3″
-
Impeller/Fan Size: 14.5″
-
Impeller Material: Steel
-
Impeller Type: Radial Fin
-
Balanced To: ISO 1940
-
Inlet Diameters: 8″ Main To 4″ x 2 Ports
-
Drum Capacity: 46 Gal.
-
Octagon Drum: Metal Drum Insert
-
Drum Collection Bag (Dia. x L): Plastic Bag (610 x 950mmL)
-
Canister Filter Type: 1 Micron
-
Filtration Efficiency: 0.2 – 2 Micron at 99.97%
-
MERV Rating: 12
-
Canister Diameter: 400mm (15.75″)
-
Canister Length: 900mm (19.69″)
-
Filter Surface Area: 9.5m² / 109ft²
-
Canister Filter Lower Dust Collection: Plastic Bag (400 x 600mmL)
-
Base With Perforated Sheet Across Canister Floor: N/A
-
Wheels: 4″ Ball Caster
-
US/CSA Approved: Yes
-
Decibel Reading: 88 dB (At 9.8ft)
-
Assembled Dimensions (L x W x H): 46″ x 27″ x 79″ | 1178 x 690 x 2025mm
-
Shipping Weight: 364bs
-
Shipping Dimensions (L x W x H): 46in x 27in x 79in
Specifications
Specifications
| Laguna Tools Cyclone Dust Collector, 2 HP, 220V, 1 Ph, C|FLUX:II MDCCF22201 | |
| AIR FILTRATION | 1 Micron |
| APPLICATION | Wood Working |
| Brand | Laguna Tools |
| DECIBEL RANGE | 81-90 |
| DEPTH | 28 in |
| HEIGHT | 87 in |
| HORSEPOWER | 2.0 HP |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL SUB-TYPE | Dust Management - Dust Collectors |
| TOOL TYPE | Dust Management |
| VOLTAGE | 208V-240V 1Ph |
| WIDTH | 48 in |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

