This complete custom kit pairs the heavy-duty Mafell ZSX Ec 120V Carpenter's Chain Saw with a 400 mm (15-3/4 in.) HM carbide-tipped fine-cut chain setup, plus essential transport and guide accessories. It is engineered for heavy-duty timber framing, joining, and carpentry operations in solid wood and laminated beams.

The saw features a 3000 W CUprex motor and a twin-guide tilt adjustment system capable of dual-sided beveling from -60 to +60 degrees. It integrates an automatic chain lubrication system to prevent oil spillage and an adjustable chip ejector for a clean workspace. The included 400 mm HM carbide-tipped chain, bar, matching sprocket, and riving knife ensure exceptionally clean, fine-sawn cuts in hard and softwoods up to a 15-3/4 in. depth.

This comprehensive package includes the heavy-duty Mafell Trolley and ZSX adapter, enabling safe and effortless transport of the fully assembled chain saw across rugged job sites without the need for disassembly. It also features the Mafell Universal Guide Support, a specialized compound miter rail that mounts to the parallel guide fence to deliver highly repeatable, precision-angled cuts from -90 to 90 degrees for jack rafters and purlins.

Features & Benefits

• 3000 W CUprex Motor: High-performance motor with digital electronics delivers consistent cutting power under load.
• 400 mm HM Carbide Chain System: Includes the bar, sprocket, riving knife, and carbide-tipped chain for polished, splinter-free cuts up to 15-3/4 in. deep.
• Dual-Sided Beveling: Tilts up to 60 degrees in opposing directions (-60 to +60 degrees) for compound miter cuts and rafter joining work.
• Jobsite Mobility: Includes the heavy-duty Mafell Trolley and adapter to securely transport the saw while protecting sensitive tracking components.
• Universal Guide Support: Attaches to the parallel fence to deliver precise compound miter cuts with legible -90 to 90 degree angle markings.
• Automatic Chain Lubrication: Adjustable lubrication flow rate prevents oil waste and keeps timber surfaces clean.
• Ambidextrous Ergonomics: Switch layout and handle alignment accommodate both left-handed and right-handed users comfortably.

What's Included

• (1) ZSX Ec Carpenter's Chain Saw, 120V (Ref. No. 925530)
• (1) 400 mm HM Carbide-Tipped Fine-Cut Saw Chain (Ref. No. 006972)
• (1) 400 mm HM Carbide Chain Bar (Ref. No. 204582)
• (1) HM Chain Sprocket (Ref. No. 204584)
• (1) 400 mm Riving Knife / Splitter (Ref. No. 204587)
• (1) Universal Guide Support (Ref. No. 202069)
• (1) Trolley (Ref. No. 202110)
• (1) Adapter for Trolley ZSX Ec (Ref. No. 202116)
• (1) Parallel Fence (Ref. No. 204591)
• (1) 6 mm Combination Screwdriver
• (1) 10 m (32.8 ft) Mains Cable - USA 120V

Note: A 240V power variant of this kit is also available.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.