The Mafell Guide Track ML (204378) is a dedicated cross-cutting track offering an extended 770 mm (2.5 ft.) cutting range. It is designed to accommodate much longer cross cuts than the standard 1.3-foot tracks supplied with KSS series saws.

This specialty track is ideal for precision cross-cutting and angular cuts on wider boards and panels. It supports impressive cutting capacities, handling up to 26.2 in. wide boards at a 30-degree diagonal, 21.4 in. at 45 degrees, and 15.1 in. at 60 degrees. It is directly compatible with legacy Mafell saws including the MF26cc/400, KSS 400, KSS 50 18M bl, KSS 60 cc, and KSS 60 18M bl.

Please note: This specialized cross-cutting track cannot be extended and does not fit inside standard Mafell carrying cases.

Features & Benefits

• Extended Cutting Capacity: 770 mm maximum cutting length handles significantly wider boards than standard KSS tracks.
• Versatile Angle Capabilities: Allows for rapid, track-guided precision diagonal cross-cuts at 30, 45, and 60-degree angles.
• Integrated Guidance: Ideal for framing, panel sizing, creating tenons, and structural joinery tasks.
• Replaceable Components: Fully compatible with Mafell's replacement splinter guard F-SS for maintaining clean cut edges.

What's Included

• (1) Guide Track ML, 770 mm

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.