The Kreg Adaptive Cutting System Saw + Universal Track Kit (ACSCT2000) combines a 12-amp plunge-cut track saw with a 62 in. Universal Track to deliver straight, smooth, splinter-free cuts in sheet goods and solid lumber. Designed for precision woodworking in workshops or on job sites, this guided cutting system provides track-saw accuracy with up to 50 in. of solo cutting capacity.

Powered by a 12-amp, 120V motor driving a 6-1/2 in. 48-tooth carbide-tipped blade, the saw cuts up to 2-1/8 in. deep at 90 degrees and 1-1/2 in. deep at 45 degrees, with bevel capacity spanning -1 degree to 47 degrees. Integrated safety features include a spring-loaded riving knife that keeps the kerf open to reduce kickback risk, an electronic blade brake, a selectable anti-kickback control switch, and an anti-tip tab on the baseplate for extra stability during bevel cuts. An industry-exclusive blade-left design gives right-handed users a clear sightline directly along the cutline.

The included 62 in. Universal Track features a zero-offset edge design that aligns the track edge exactly with your cutline for quick alignment. A zero-clearance anti-chip strip supports wood fibers at the cut edge to minimize tear-out on plywood and veneer, while GripMaxx anti-slip backing strips hold the track firmly to your workpiece without requiring clamps for many standard cuts. Low-friction top glide strips ensure smooth, steady saw movement across the full length of the track.

For battery-powered cordless operation, consider the 20V Ionic Drive version (ACSCT2000B). Users seeking a complete, mobile cutting workstation with integrated measuring scales, miter guides, and material support can pair this kit with or upgrade to the Adaptive Cutting System Master Kit (ACSCT3000).

Features & Benefits

• 12-Amp Corded Motor: Delivers continuous power and torque for cutting dense sheet goods and thick hardwoods.
• 62 in. Universal Track: Provides 50 in. of guided cut capacity solo and can be joined with a second track for up to 112 in. capacity.
• Zero-Offset Track Design: Aligns the edge of the guide track directly with your cutline for fast, accurate setup without measurement offsets.
• Zero-Clearance Anti-Chip Strip: Supports wood fibers directly at the cut edge to deliver clean, splinter-free results in plywood and solid wood.
• Comprehensive Safety Features: Built with a spring-loaded riving knife, electronic blade brake, selectable anti-kickback control, and anti-tip tab.
• Blade-Left Sightline: Optimized for right-handed operators to maintain continuous visual contact with the blade and cutline.
• GripMaxx Anti-Slip Strips: Secure the track to the workpiece surface to enable clamp-free cutting on many operations.
• Smooth Glide Strips: Reduce movement resistance along the top track surface for consistent, controlled feed rates.

What's Included

• (1) Adaptive Cutting System Plunge-Cut Track Saw
• (1) Universal Track - 62 in.
• (1) 6-1/2 in. 48-Tooth Carbide-Tipped Saw Blade
• (1) Dust Collection Bag
• (1) Owner's Manual

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.