Kreg KT0519-112-75 5mm x 19mm x 30mm Hardwood Loose Tenons deliver exceptional strength, alignment, and joint stability for fine woodworking, cabinetmaking, furniture production, and casing assembly. Precision-milled from 100% solid hardwood, these pre-cut tenons provide a reliable hidden fastener solution for dense structural joints.

Designed for seamless compatibility, these 5 mm tenons work with mortises cut by the Kreg Edge Loose Tenon Joiner, Kreg MortiseMate, and Festool Domino joiners. Each tenon features longitudinal fluting to evenly distribute wood glue and maximize surface bonding. To ensure flat joint closure without hydrostatic hydraulic lock, tenons are cut approximately 1/16 in. shorter than nominal length to leave adequate space for glue accumulation at the bottom of the mortise. Supplied in a resealable storage container, the packaging protects the hardwood from ambient humidity fluctuations that cause swelling or shrinkage.

Features & Benefits

• 100% Solid Hardwood Construction: Provides high tensile and shear strength for long-lasting, durable wood joints.
• Precision Milled Fit: Engineered specifically to match 5 mm mortising cutters for snug, accurate joint alignment.
• Fluted Glue Channels: Allows glue to flow evenly around the tenon for uniform adhesion and maximum bond strength.
• Glue Clearance Sizing: Cut approximately 1/16 in. shorter than nominal length to accommodate excess glue without preventing tight joint closure.
• Resealable Storage Container: Protects tenons against ambient moisture changes to prevent wood swelling and contraction.
• Multi-Platform Compatibility: Fits mortises created with Kreg Edge, Kreg MortiseMate, and Festool Domino tools.

What's Included

• (75) 5mm x 19mm x 30mm Pre-cut Hardwood Loose Tenons
• (1) Resealable Storage Container

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.