The Kreg ACSCT2000B 20V Ionic Drive 6-1/2 in. Plunge-Cut Track Saw Kit with 62 in. Universal Track delivers portable, high-precision guided cutting for sheet goods, solid wood, and plywood without requiring an electrical cord. Powered by the 20V Ionic Drive brushless motor platform, this system pairs a high-torque plunge-cut track saw with Kreg's 62 in. Universal Track to produce clean, straight, splinter-free cuts in the shop or on the jobsite.

The cordless saw features a 6-speed brushless motor and a thin-kerf 1.6 mm 40-tooth carbide-tipped blade engineered to optimize runtime while slicing through dense hardwoods and paneling. Designed with a blade-left layout, right-handed users gain an unobstructed sightline directly to the cutline. Integrated safety mechanisms include a spring-loaded riving knife that stays in the blade kerf to prevent kickback, a selectable anti-kickback control switch to block backward track movement, a fully shrouded retracting blade, and an electronic blade brake.

Included in the kit is the 62 in. Universal Track, which features a zero-offset edge that aligns directly with your cutline for quick, accurate setup without math or calculations. Zero-clearance anti-chip strips prevent wood fiber tear-out on delicate surfaces, while GripMaxx high-friction foam strips secure the track onto your material so many cuts can be made without clamps. For added stability, an anti-tip tab on the saw's baseplate locks into the track guide slot, keeping the saw stable during bevel cuts up to 47 degrees.

Features & Benefits

• Cordless Brushless Motor: 6-speed 20V brushless motor combined with a thin-kerf 1.6 mm blade maximizes battery life while cutting thick hardwoods and sheet goods.
• 62 in. Universal Track Included: Provides up to 50 in. of cutting capacity off the Project Table with a zero-offset edge aligned straight to the cutline.
• Splinter-Free Edge Quality: Zero-clearance anti-chip strip supports material fibers at the cutline to eliminate tear-out on plywood and melamine.
• GripMaxx Anti-Slip Backing: Holds the track firmly in position on the workpiece, allowing clamp-free operation on many standard cuts.
• Blade-Left Sightline: Optimized for right-handed operators to maintain clear visual alignment with the cut line.
• Comprehensive Safety System: Features a spring-loaded riving knife, selectable anti-kickback control, fully shrouded retracting blade, and an electronic blade brake.
• Anti-Tip Base Tab: Locks into the track groove to maintain tool balance and stability during angled and bevel cuts up to 47 degrees.
• Depth & Bevel Capacities: Cuts up to 2-1/8 in. deep at 90 degrees and 1-1/2 in. deep at 45 degrees with bevel adjustment from -1 degree to 47 degrees.
• Complete Cordless Power Kit: Includes a Blue Ion 4.0 Ah battery, charger, 40T carbide blade, and dust collection bag.

What's Included

• (1) 20V Ionic Drive 6-1/2 in. Plunge-Cut Track Saw
• (1) Adaptive Cutting System Universal Track - 62 in. (ACSCT62)
• (1) 6-1/2 in. 40-Tooth Carbide-Tipped Saw Blade
• (1) Blue Ion 4.0 Ah Battery
• (1) Blue Ion Charger
• Owner's Manuals

For users seeking continuous AC power, the corded Kreg ACSCT2000 offers a 12-amp 120V setup with the same 62 in. Universal Track. Tradespeople who already own Kreg 20V batteries can select the bare tool (KPTPS200B) or the saw kit without track (KPTBPS200B). Expand your panel-cutting workflow further by adding the Adaptive Cutting System Project Table (ACS1000).

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.