The JET JPJ-APS-SR (JT1-3806) is a heavy-duty adjustable pipe roller stand engineered to support large-diameter pipe up to 42 in. with an industry-leading load capacity of 5,300 lbs. Designed for heavy industrial pipe fabrication, layout, fit-up, and welding, this stand provides a broad 26-1/2 x 33-1/2 in. footprint and an adjustable working elevation from 32 to 46 in.

The stand utilizes a dual-tier height adjustment system for precise leveling under load. Coarse height changes are managed via inner tube mounting holes secured with heavy-duty thru-pins featuring safety locking blades. Fine height adjustments are executed by turning dual 3-spoke spanner nuts on 1-1/2 in. ACME screw shafts, allowing operators to level the horizontal beam accurately. Roller spacing is easily adjusted by turning the end-mounted roller width adjustment nut to accommodate varying pipe diameters while keeping the pipe clear of the main horizontal beam. Each 4 in. diameter x 1-1/2 in. wide steel roller is equipped with a grease zerk axle for smooth rotation during pipe turning and includes an integrated roller brake screw handle to apply adjustable resistance or lock pipe rotation during layout and welding.

To facilitate jobsite transportation and storage, the stand is built with a heavy-duty reinforced frame, fully welded leg sockets, and folding legs. The legs extend smoothly along a sliding base ring and lock into place with a dedicated leg-lock T-screw.

Features & Benefits

• 5,300 lbs. Load Capacity: Engineered for extreme-duty support of large steel pipes and heavy cylindrical stock up to 42 in. in diameter.
• 32 to 46 in. Adjustable Height: Accommodates a wide range of shop working heights and fabrication setups.
• Dual-Tier Elevation Control: Uses locking-blade thru-pins for coarse height locking and dual spanner nuts for fine horizontal beam leveling.
• Adjustable Roller Width: End nut mechanism easily expands or narrows roller spacing to fit pipe diameters up to 42 in.
• Integrated Roller Brake System: Screw handles on each roller housing allow operators to apply drag resistance or lock pipe rotation during alignment.
• Oversized Steel Rollers: 4 in. diameter x 1-1/2 in. wide steel rollers provide generous surface contact for smooth turning during fit-up and welding.
• Grease Zerk Axles: Integrated grease fittings enable easy maintenance and long axle service life.
• Folding Base Frame: Collapsible leg design with leg-lock T-screws allows compact transport and storage between jobsite locations.
• Heavy-Duty Reinforced Frame: Rectangular tubing construction with fully welded leg sockets resists twisting and flexing under maximum load ratings.

What's Included

• (1) Adjustable Pipe Roller Stand (JPJ-APS-SR)

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.