Bosch 18V Dust Collection Attachment for Bulldog Hammers

This 18V mobile dust extractor allows users of the Bosch 18V D-handle Bulldog to achieve maximum mobility around the jobsite along with a dust-extraction solution. The GDE18V-26D 18V SDS-plus Bulldog 1 In. Dust Collection Attachment provides a true cordless solution when used with the 18V 1 In. GBH18V-26D Bulldog rotary hammer. It is also compatible with the legendary corded 1 In. 11255VSR and the 1-1/8 In. GBH2-28L and RH228VC Bulldog rotary hammers. The attachment is powered by a Bosch 18V battery (sold separately). It features a HEPA filter, helping users move toward compliance with OSHA silica dust regulations. It helps to reduce harmful airborne silica dust and reduce the labor required for dust clean up after drilling. The attachment comes with two Dust-Eye options (one small, one large) and a 4 In. extension. The large Dust-Eye accommodates bit diameters up to 1 In. in diameter and the extension accommodates bit lengths up to 10 In. in length. The extractor has an aluminum guide rail for durability and smooth retraction of the Dust Eye during the drilling process. The dust canister capacity can accommodate up to 20 holes using a 1/2 In. diameter bit, drilling 2 In. deep into concrete.

Features:

• Mobile dust extractor design - built to deliver maximum mobility used with the Bosch cordless GBH18V-26D D-handle Bulldog
• HEPA filter - so users can move toward OSHA silica dust regulation compliance
• Two Dust-Eyes and 4 In. extension - available in 5/8 In. and 1 In. sizes for use with bits 5/32 In. to 1 In. in diameter and up to 10 In. in length
• Aluminum guide rail - provides smooth retraction of the Dust Eye during the drilling application
• Dust container - provides capacity for up to 20 holes using a 1/2 In. diameter bit drilling 2 In. deep into concrete
• Dust control - reduces harmful airborne silica dust and reduces the labor require for dust clean up

Specifications:

• Wet or Dry Application: Dry

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.