The Festool ZS FS-EP TS/TSC 55 Guide Rail Plunge Cut Accessory Kit (578697) provides a complete, organized solution for making precise, repeatable plunge cuts and cut-outs with Festool TS 55 series track saws. Compatible with Festool TS 55 R, TS 55 F, TSC 55, TSC 55 K, and TSC 55 KS plunge-cut saws paired with FS/2 guide rails, this kit combines the FS-EP depth positioning aid with two FS-EZ 150 one-hand guide rail clamps inside a Systainer SYS3 M 112 storage case. Designed for finish carpenters, cabinetmakers, and installers, it eliminates setup delays and overcuts when cutting sink openings, window cut-outs, and panel recesses.

The included depth position indicator mounts directly in the top channel of the guide rail to show the exact entry and exit points of the saw blade at any preset cutting depth. Operating as both a front and rear guide rail stop, it delivers consistent cut limits across repetitive tasks. Its symmetrical design permits installation on either side of the guide rail for accurate alignment close to walls or in confined spaces. Integrated support plates stabilize the saw during plunge entry to prevent lifting, while fine-adjustment calibration screws ensure exact alignment with specific saws, guide rails, and resharpened blades.

To keep the guide rail firmly locked to the workpiece, the kit includes two FS-EZ 150 one-hand clamps. These clamps engage the lower groove of the guide rail in a single motion, allowing fast, one-handed securing or spreading without shifting the rail. All components store neatly in the included Systainer³ SYS3 M 112, which features custom inlay storage and additional capacity for circular saw blades and guide rail connectors.

Features & Benefits

• Exact Blade Entry & Exit Indication: Displays the precise start and stop points of the saw blade at set cutting depths to eliminate overcuts during plunge cuts.
• One-Hand Guide Rail Clamping: Includes two FS-EZ 150 one-hand clamps for fast, single-handed clamping of the guide rail to the workpiece.
• Dual-Sided Rail Mounting: Symmetrical positioning aid mounts on either side of the guide rail for precise cut-outs near walls and in tight spaces.
• Integrated Front & Rear Stops: Functions as physical limits along the guide rail to deliver repeatable cut-out dimensions.
• Tool-Free Drop-In Installation: Drops directly into the top guide rail channel from above and locks securely without additional tools.
• Cutting Width Indicator: Clearly displays cut width for accurate layout when working on the right side of the guide rail or sizing narrow panel strips.
• Systainer System Storage: Stores all components organized inside a Systainer SYS3 M 112 case with extra room for saw blades and rail connectors.
• Fine Adjustment Calibration: Integrated calibration screws enable fine-tuning to account for specific saw models, rail tolerances, and blade wear.

What's Included

• (1) FS-EP Depth Position Indicator TS/TSC 55 (Front & Rear Indicators)
• (2) FS-EZ 150 One-Hand Clamps
• (1) Systainer SYS3 M 112 Storage Case with Insert

Choose the ZS FS-EP TS/TSC 55 Accessory Kit (578697) for a complete plunge-cutting setup with depth positioning, guide rail clamps, and Systainer organization for TS 55 and TSC 55 saws. For the standalone depth position indicator without clamps or a Systainer case, select the FS-EP TS/TSC 55 (578695). For Festool TS 60 K track saws, select the dedicated FS-EP TS 60 (578696).

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.