EGO Commercial 56V Cordless Straight Shaft Edger (Bare Tool) EDX2000
EGO Commercial 56V Cordless Straight Shaft Edger (Bare Tool) EDX2000
Couldn't load pickup availability
Details
Details
The EGO Commercial EDX2000 Straight Shaft Edger is engineered for demanding landscape maintenance, delivering gas-equivalent performance for professional turf edging along sidewalks, driveways, and curbs. Powered by a high-performance brushless motor, this bare tool integrates intelligent electronics to match the power of a 25cc gas edger without emissions, noise, or fuel mixing.
Built with an industrial-strength carbon fiber shaft and UV-resistant composite housing with IPX5 weather resistance, the edger withstands daily heavy-duty jobsite abuse. The 8-inch blade features an adjustable guide wheel allowing up to a 3-inch maximum cutting depth for clean, consistent turf management. A three-speed digital control paired with a variable-speed instant-on trigger gives operators precise command across various overgrowth conditions.
Features & Benefits
- Brushless Motor: Delivers 1,600W max power and 1,200W rated power, replacing a 25cc gas engine.
- Carbon Fiber Shaft: High-strength solid shaft built for demanding high-torque applications and long-term durability.
- Adjustable Cutting Depth: 8-inch blade with an adjustable guide wheel supports up to a 3-inch maximum cutting depth.
- Three-Speed Digital Control: Allows operators to select output speeds to match specific edging conditions.
- IPX5 Weather Resistance: Engineered to perform reliably in wet weather conditions.
- Bare Tool Configuration: Compatible with all EGO 56V ARC Lithium batteries; battery and charger sold separately.
What's Included
- (1) EGO Commercial Straight Shaft Edger (EDX2000)
- (1) 8-Inch Edger Blade
- (1) Adjustable Guide Wheel
- (1) Debris Guard
Specifications
Specifications
| Specification | Value |
|---|---|
| Model | EDX2000 |
| Product Type | Commercial Straight Shaft Edger |
| Motor Type | Brushless |
| Max Power | 1,600W |
| Rated Power | 1,200W |
| Voltage | 56V |
| Blade Diameter | 8 in. |
| Maximum Cutting Depth | 3 in. |
| Speed Control | Three-Speed Digital Control with Variable Trigger |
| Shaft Material | Carbon Fiber |
| Ingress Protection | IPX5 |
| Battery Included | No (Bare Tool) |
| Charger Included | No |
| Warranty | 2-Year Commercial Warranty |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



