The Bosch EXSB18V-150N EXPERT is a high-torque 18V cordless 1/2 in. hammer drill/driver engineered for demanding drilling, hole-sawing, and structural fastening in timber, steel, and masonry. Equipped with a BITURBO Brushless motor, it delivers up to 150 Nm (1,327 in-lbs) of maximum torque, providing up to 75 percent more power than conventional 18V drill platforms when paired with high-output batteries.

To withstand extreme torsional stress, the drill features an all-metal 2-speed gearbox and a heavy-duty 1/2 in. (13 mm) ratcheting metal chuck. Speed ranges from 0 to 550 RPM in first gear for large-diameter drilling and heavy lag driving, and up to 2,200 RPM with 30,000 BPM in second gear for rapid impact drilling in masonry and concrete blocks. Rapid Mode Selection allows instant switching between driving, drilling, and hammer drilling modes without losing torque clutch settings.

Integrated user-protection and precision systems include KickBack Control, which senses sudden bind-up situations and disengages the drivetrain to reduce wrist injury risks (with an operator override switch when needed). Electronic Angle Detection assists carpenters and timber framers by verifying pre-set drive angles for long structural timber screws.

Features & Benefits

• BITURBO Brushless Motor: Engineered to exploit the high current output of high-capacity batteries, delivering 150 Nm max torque for heavy-duty commercial drilling.
• Switchable KickBack Control: Automatically shuts down the motor if the accessory jams in the workpiece, mitigating violent kickback rotation.
• Electronic Angle Detection: Guides operators to drive structural screws at precise predefined angles in heavy timber construction.
• All-Metal 1/2 in. Chuck: 13 mm heavy-duty metal ratcheting chuck ensures maximum bit retention and wear resistance under high torsional load.
• 2-Speed Metal Gearbox: Delivers 0-550 RPM for high-torque drilling and 0-2,200 RPM with hammer action up to 30,000 BPM for fast drilling in masonry.
• Rapid Mode Selection: Enables seamless switching between screwdriving, drilling, and percussion drilling without altering the 25-stage torque clutch.
• Heavy-Duty Auxiliary Handle: Multi-position auxiliary side handle provides rigid two-handed leverage during high-torque hole-sawing operations.

What's Included

• (1) EXSB18V-150 18V EXPERT 1/2 in. Hammer Drill/Driver (Bare Tool)
• (1) Auxiliary Side Handle
• (1) Belt Clip

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.