The Bosch EXSR18V-150N EXPERT is an industrial 18V cordless 1/2 in. drill/driver built for heavy-duty commercial drilling, large-diameter hole-sawing, and structural timber fastening. Powered by a high-efficiency BITURBO Brushless motor, it produces up to 150 Nm (1,327 in-lbs) of maximum torque, giving commercial contractors and timber framing specialists the rotational power required for large wood augers and metal fabrication.

Engineered without a hammer percussion mechanism to reduce tool weight and nose length, the EXSR18V-150N utilizes a robust 2-speed metal gearbox. First gear provides 0 to 550 RPM for heavy structural screws up to 13 mm and wood hole saws up to 150 mm, while second gear operates from 0 to 2,200 RPM for high-speed metal drilling up to 16 mm. Its 25+1 clutch settings provide fine calibration across varying material densities.

User safety and work accuracy are enhanced by integrated electronics. Switchable KickBack Control monitors rotational acceleration, automatically braking the motor if a large bit binds in dense grain or plate steel. For timber framers running structural connectors into beams, Electronic Angle Detection visually signals when the tool matches the target fastener angle.

Features & Benefits

• BITURBO Brushless Motor: High-performance drivetrain engineered for severe drilling applications, providing 150 Nm max torque.
• Large-Diameter Drilling Capacity: Powers hole saws in wood up to 150 mm and twist drill bits in steel up to 16 mm.
• Switchable KickBack Control: Automatically disengages the drive motor during sudden bit jams to help prevent operator wrist strain.
• Electronic Angle Detection: Ensures accurate screw alignment at preset angles in timber engineering and roof truss assembly.
• 1/2 in. All-Metal Chuck: 13 mm heavy-duty ratcheting chuck provides durable bit gripping and zero-slip performance under full load.
• 2-Speed Metal Transmission: Provides low-speed high-torque driving (0-550 RPM) and high-speed metal drilling (0-2,200 RPM).
• Auxiliary Side Handle: Long adjustable side handle supplies firm two-handed leverage to control high torque output safely.

What's Included

• (1) EXSR18V-150 18V EXPERT 1/2 in. Drill/Driver (Bare Tool)
• (1) Auxiliary Side Handle
• (1) Belt Clip

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.