ACS440, Kreg Adaptive Cutting System Project Table Extension Brackets

Add more workpiece support to the Adaptive Cutting System Project Table for full sheets of plywood or long boards with the Project Table Extension Brackets. These brackets mount in the aluminum perimeter frame of the Project Table and accept 2x4 boards that can then be supported at the other end by a Kreg® Track Horse, Mobile Project Center, or another work support.

Made from thick steel, the Project Table Expansions Brackets are adjustable to position the 2x4s in two ways: flush with the surface of the Project table, of 3/4" below the surface, which allows for adding a plywood surface to the enlarged table. Holes in the sides of the brackets allow driving the included screws into the 2x4s to hold them in place in the brackets.

Designed for use with the Adaptive Cutting System Project Table. Sold as a Pair.

• Brackets for extending the Adaptive Cutting System Project Table work area
• Mount in aluminum table perimeter and accept 2x4 boards to extend work area of Project Table
• 2x4s can be supported by a Kreg® Track Horse, Mobile Project Center, or another work support
• Adjustable to position 2x4 supports flush with table surface, or 3/4" below when adding a plywood table surface is desired
• Durable steel construction

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.