Amana Tool Carbide Tip Countersink #4 Screw 3/8 x 5/64 x 5/16 in 55207
Amana Tool Carbide Tip Countersink #4 Screw 3/8 x 5/64 x 5/16 in 55207
Couldn't load pickup availability
Details
Details
55207, Amana Tool Carbide Tipped Countersink #4 Screw 3/8 Dia x 5/64 Drill Dia x 5/16 Round Shank
Used to countersink holes for the heads of screws in wood, plastic, and non-ferrous materials. The 2-flute integral design ensures uniform and concentric results each and every time. Carbide tips provide chip-free hole edges and last much longer than steel countersinks. Available in a wide variety of sizes, complete with the HSS M2 fully ground drill bit.
With the adjustable depth drill bit you can adjust them for whatever size material you’re working with. They are best used with a drilling toolpath, utilizing the peck drill option at .25" per pass with a .125" retract height.
For best results run at 3,000 RPM with a 30 IPM (Inches Per Minute) plunge rate. No feed rate needs to be set with these as they only move up and down with the Z axis, not side to side. If your software doesn’t allow a 0 feed rate, you can enter 1 IPM (Inch Per Minute) in the feed rate as a placeholder.
Excellent for Drilling:
- Natural Woods
- Man-Made Boards
- MDF
- Chipboard
- Plywood
- Aluminum/Non-Ferrous
- Aluminum Composite Material (ACM)
- Composites
- Composite Decking Materials
- High-Density Polyethylene (HDPE)
Warning: When drilling aluminum/non-ferrous materials, for optimal results and extended tool life use lubricant or air cooling. Make sure the material is fixed and the drill is stable during drilling.
Specifications:
- (a°) Angle: 49°
- (D) Diameter: 3/8
- (B) Cutting Height: 1/2
- (d) Shank: 5/16
- Overall Length (L): 2-9/16
- Wood Screw Size: #4
- D1: 5/64
- Replacement Drill: 630-001
- L1: 1-5/8
Specifications
Specifications
| Amana Tool Carbide Tip Countersink #4 Screw 3/8 x 5/64 x 5/16 in 55207 | |
| APPLICATION | Contracting & Remodeling / Wood Working |
| Brand | Amana Tool |
About Brand
About Brand
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

