SawStop Contractor Table Saw 1.75HP 115/230V w/ 52" T-Glide Advance Fence Assembly CNS175-ATGP52
SawStop Contractor Table Saw 1.75HP 115/230V w/ 52" T-Glide Advance Fence Assembly CNS175-ATGP52
Low stock
Couldn't load pickup availability
Details
Details
SawStop Contractor Saw 1.75HP 1ph 52" - CNS175-ATGP52
Whether you're on the jobsite or in a small shop, the SawStop Contractor Saw 1.75HP 1ph 52" delivers big-saw performance in a portable package. Its 1.75HP 1ph 120v 60Hz motor powers a 52" rip capacity guided by the T-Glide Advance fence system. Cast-iron stability, poly V-ribbed belts and under-table dust shrouding make every cut smooth and accurate, and the SawStop safety brake protects you at all times.
Why Choose This Saw
- SawStop safety system stops and retracts the blade on contact with skin, delivering peace of mind on the jobsite and in the shop
- Better-than-hybrid performance blends mobility, stability and precision for professionals and serious hobbyists
- 1.75 horsepower motor with poly V-ribbed belt provides smooth power transfer and reduces vibration
- Cast-iron tabletop with steel extension wings offers rock solid stability while keeping weight manageable for jobsite mobility
- Professional T-Glide or T-Glide Advance fence system delivers lightweight, smooth travel and secure clamping for accurate cuts
- Under-table dust shrouding and multiple port sizes (2.5 and 4 inches) enable efficient dust removal; optional dust collection blade guard enhances above-table collection
- Zero clearance insert reduces tear-out for cleaner cuts; vertical slide elevation system maintains precise blade alignment while minimizing binding and kickback
- Powder-coated steel and cast iron components resist rust and ensure long-term reliability
- Upgradeable design allows you to add cast-iron wings, mobile base, dust collection panel or in-line router table as your needs grow
- Hi-low aluminium fence face adjusts tall for standard ripping, low for narrow cuts or can be used as an L-fence
- Dovetail accessory slot with sliding wedges lets you attach featherboards, fixtures and jigs; compatible with most T-track hardware
- Fence face slides forward for use as a step-off block when crosscutting and can be repositioned as a low fence to reach under the blade guard
- Extruded aluminium face won't warp or delaminate and can mount on either side of the fence
- Rear roller support ensures smoother travel along the table compared with traditional glide pads
Specifications & Included Equipment
- Motor: 1.75 HP, 120 V single-phase (configurable to 230 V)
- Rip capacities: 30 inches with Premium fence or 36/52 inches with T-Glide or T-Glide Advance fence
- Table: cast-iron top with steel extension wings; weight around 245 lb
- Cutting capacity: maximum depth 3-1/8 inches at 0 degrees and 2-3/16 inches at 45 degrees
- Dado capacity: 13/16 inches; arbor diameter: 5/8 inch
- Dust port: 4 inch and 2.5 inch; vertical slide elevation for smooth, consistent operation
- Motor configuration: 1.75HP 1ph 120v 60Hz
- Rip capacity: 52"
- Fence assembly: T-Glide Advance
- Model/part number: CNS175-ATGP52
Specifications
Specifications
About Brand
About Brand
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
