Skil 12V/20V Brushless Flip Drill, 20V Kit DL6300D-12
Skil 12V/20V Brushless Flip Drill, 20V Kit DL6300D-12
Low stock
Couldn't load pickup availability
Details
Details
SKIL 20V Brushless Flip Drill Kit DL6300D-12
Quickly switch between drilling pilot holes and driving screws with a simple twist using the SKIL 12V/20V Brushless Flip Drill. The cordless flip drill features a two-in-one double collet flip head that allows you to change between drilling and driving bits quickly and easily rather than swapping between bits using the same chuck. Its slim, compact design gives you easy access to corners, edges, and other tight, hard-to-reach spaces. Electronically controlled torque settings plus drill mode easily adapt to the application at hand. Magnetic onboard storage gives you quick access to bits and screws, and an LED worklight with pre-light and afterglow delivers maximum visibility. The included 20V 2.0Ah USB-C battery features two-way rapid charging that allows you to charge the battery or portable devices with its 60W USB-C port. When it's time to recharge the battery, the multifunctional charger ditches the traditional power tool charging dock for a compact, convenient format that can plug in anywhere and fully charge the 2.0Ah battery in 55 minutes. The cordless flip drill kit includes the 12V/20V brushless flip drill, 20V 2.0Ah USB-C battery, 20W USB-C charger, USB-C charging cable, belt clip, 2-inch PH2 screwdriving bit, and (4) hex shank HSS bits.
Features:
- 20V FLIP DRILL SET - Kit includes the 12V/20V brushless flip drill, 20V 2.0Ah USB-C battery, 20W USB-C charger, USB-C charging cable, belt clip, 2-inch PH2 screwdriving bit, and (4) hex shank HSS bits
- DOUBLE COLLET FLIP HEAD - Quickly change between drilling and driving bits with just a twist
- SLIM, COMPACT DESIGN - For easy access to corners, edges, and other tight, hard-to-reach spaces
- TORQUE ADJUSTMENT & DISPLAY - Electronically controlled torque settings plus drill mode to adapt to the application at hand
- MAGNETIC ONBOARD STORAGE - For quick access to bits and screws
- LED WORKLIGHT - With pre-light and afterglow for maximum visibility
- POWERED BY SKIL 12V OR 20V BATTERIES - Adaptable multiple power sources for convenience
- TWO-WAY RAPID CHARGING - Charge the battery or personal devices with the battery's 60W USB-C port
- MULTIFUNCTIONAL 20W CHARGER - Charges USB-C compatible SKIL batteries and other devices, fully charges 2.0Ah USB-C battery in 85 minutes
Specifications:
- Voltage (V) — 12/20 V
- Motor Type — Brushless
- Number Of Gear Speeds — 2
- No Load Speed (rpm) — 12V: 0-420/0-1550 20V: 0-450/0-1700
- Max. Torque (in.lbs) — 12V: 300 (for NA) 20V: 350 (for NA)
- Clutch Settings — 9+D, Electronic
- Chuck Capacity (inch) — 1/4
- Chuck Type — Hex Collet
Specifications
Specifications
| Skil 12V/20V Brushless Flip Drill, 20V Kit DL6300D-12 | |
| Brand | Skil |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
