NV75A5M, Metabo HPT 3 in. Siding/Light Framing (Sheathing) Coil Nailer

The 3 Inch Siding/Light Framing Coil Nailer (NV75A5) bridges the gap between framing and siding on the jobsite. It has the power to frame and the precision and convenient features needed for siding work. The capability to drive up to 3" x 0.131" fasteners, and adjustable depth of drive make it the perfect tool for sheathing applications. Its light weight (5.7 lbs), flexibility to accept wire and plastic collated nails, no mar nose cap, and selective actuation give it the convenience needed for siding applications.
Additional features like the side-load tilt bottom magazine, 360-Degree adjustable air deflector, aluminum rafter hook, and plastic shield make the NV75A5 the tool of choice for any framing and siding crews!

Features:

• AWARDS: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine
• FASTENERS: Accepts 16-Degree wire coil nails from 1-3/4 in. - 3 in. and 15-Degree plastic coil nails from 1-3/4 in. - 2-1/4 in.
• LIGHTWEIGHT: Only 5.7 lbs for easy maneuverability
• SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch
• EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads
• TOOL-LESS DEPTH ADJUSTMENT: Depth adjustment to countersink or flush drive into a variety of materials
• NO MAR NOSE CAP: Protects material from accidental marks
• AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction
• RECOMMENDED: Use Metabo HPT Nails for best results
• COMPLIANT: Safety standards for pneumatic nailers in the United States

Specifications:

• Nail Length (Plastic Collated): 1-3/4 in. - 2-1/4 in.
• Nail Length (Wire Collated): 1-3/4 in. - 3 in.
• Nail Diameter (Wire Collated): .099 in. - .131 in.
• Nail Diameter (Plastic Collated) : .090 in. - .099 in.
• Actuation: Selective (Sequential/Contact)
• Magazine Angle: 16-degree Wire - 15-degree Plastic
• Magazine Loading: Side Load - Tilt Bottom
• Nail Capacity: 200-300
• Operating Pressure: 70-120 PSI
• Dry-fire Lockout: No
• Depth Adjustment: Tool-less
• Adjustable Exhaust Port: Yes
• Jam Clearing: Open Nose Design
• Rubber Grip: Yes
• Dimensions (LxWxH): 10-11/16 in. x 5-3/16 in. x 13-3/8 in.
• Weight: 5.7lbs
• Warranty : 5-Years

Includes:

• Aluminum Rafter Hook (889661M)
• No Mar Nose Cap (883106)
• Safety Glasses (875769)

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.