The Mafell 203214 Parallel Guide Fence provides an accurate, rail-free referencing solution for rip cuts. By indexing off the edge of the workpiece, it allows operators to perform long, repeatable parallel cuts without needing to set up a guide rail system.

Compatible with the MT55cc, MT55 18M bl, and select legacy Mafell circular saws, this fence provides the added benefit of increasing maximum cutting depth by 5.5mm since the saw is not riding on a track. It supports a wide parallel cutting range, making it ideal for ripping panels, trimming doors, and creating precise board widths.

Features & Benefits

• Increased Depth Capacity: Gains 5.5mm of cutting depth by operating the saw off the guide rail.
• Wide Cutting Range: Provides a parallel cutting capacity of 1-9/16 in. to 4-5/8 in. on the right side and 7-3/8 in. to 12-5/16 in. on the left side when used with the MT55cc.
• Fast Setup: Eliminates the need for a track when referencing a straight, true edge.
• Broad Compatibility: Works natively with MT55cc, MT55 18M bl, KSS 400, MS 55, KST 55SE, and KST 55S.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.