The Mafell Guide Track S (Ref. No. 208169), also supplied as Guide Track S for the KSS 300 and KSS 40 18M bl systems, is a compact cross-cutting guide track engineered for high-precision interior finishing, trim work, and panel sizing. Providing a maximum cutting range of 292 mm (11 1/2 in.), this track converts compact Mafell circular saws into a rapid, single-handed cross-cutting station.

Featuring integrated angle stops and an automatic return spring mechanism, the Guide Track S pulls the saw back to its starting position after each cut. The rubber splinter guard prevents top-surface tear-out, ensuring clean, splinter-free edges on delicate laminate, parquet, and sheet materials. Constructed from lightweight aluminum, it offers exceptional maneuverability for overhead and scaffold work.

Features & Benefits

• 11 1/2 in. Cutting Range: Provides a 292 mm (11 1/2 in.) cutting range optimized for compact cross-cutting tasks.
• Spring-Return Compatibility: Interfacing geometry works seamlessly with the KSS 300 and KSS 40 18M bl automatic return mechanisms.
• Rubber Splinter Guard: Guarantees clean, tear-free edge quality on veneered boards, flooring, and panel materials.
• Lightweight Aluminum Design: Weighs just 3.07 lbs. for effortless handling during overhead and interior installation work.
• Precise Angle Settings: Integrated fence stops allow quick, repeatable miter and cross cuts.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.