The Laguna Tools BBSF-1-34-183 is a 183 in. x 1 in. Shear Force bandsaw blade engineered for precision resawing and bookmatching on commercial 24 in. bandsaws such as the Laguna LT24 and LT24 HD. Featuring an ultra-thin .024 in. carbon steel backing and an alternating 3-4 variable pitch, it acts as an economical, thin-kerf alternative to specialty carbide blades.

The alternating 3-4 tooth spacing disrupts harmonics, dampening vibration to yield smoother cut faces and reduce post-sawing sanding or planing. The thin kerf profile significantly reduces sawdust waste, maximizing board yield when slicing valuable hardwood veneers and exotics. With its full 1 in. width, the blade resists lateral drift and barrel deflection, maintaining straight tracking against the fence under high feed loads.

Features & Benefits

• Alternating 3-4 Variable TPI: Disrupts harmonic resonance to minimize cut vibration and produce clean, ready-to-finish board faces.
• Ultra-Thin .024 in. Backing: Cuts a narrow kerf that reduces wood waste and preserves valuable raw stock during resawing.
• Full 1 in. Blade Width: Delivers high beam strength to eliminate blade wandering, dish cuts, and barrel bowing.
• High Carbon Steel Construction: Provides a durable cutting edge for domestic hardwoods, exotic species, and thick stock.
• Lower Motor Resistance: Narrow kerf design draws less motor amperage and lowers cutting effort compared to wide-kerf blades.
• Made in USA: Manufactured to rigid tolerances for reliable joint alignment and tracking precision.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.