Bosch 25-Piece 1/8 in. SDS-plus Bulldog Xtreme Mortar Knife

The Bosch 1/8 In. SDS-plus Bulldog Xtreme Mortar Knife is designed to remove mortar in vertical joints while not damaging the brick. It is only 1/8 In. wide. The narrow width, the blunt tip and the plunge blade is designed for greater efficiency, without binding to brick. The plunge depth allows the user to remove mortar to proper depth, to eliminate the "half-moon" remainder often left over by diamond blades - allowing for professional results. The straight edge removes debris quickly and easily. The SDS-plus shank is designed for fast power transfer and control.

Features:

• Tapered mortar knife design - engineered with a 1/8 In. width, plunge tip and optimized depth, fitting SDS-plus hammers for removing mortar in vertical joints
• Narrow width - engineered to be only 1/8 In. wide to fit between brick
• Efficient design - combines a blunt tip with no sharp edges, to avoid jamming
• Proper repointing depth - optimized to allow the blade to remove half-moon mortar debris often left behind by diamond blades
• Straight edge - cuts mortar quickly and with control
• SDS-plus shank - allows for maximum power transfer and control

Specifications:

• Bit Material: Alloy Steel
• Bit Type: Chisel
• Chuck Fitment: SDS-Plus
• Contents: (25) HS1402 1/8 In. SDS-plus Bulldog Xtreme Mortar Knife
• Length in: 8"
• Width in: 0.125"

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.