8-1/4 in. Plunge-Cut Track Saw TS 75 EQ-F-Plus, 3 in. Cut Depth, 1600W, 120V

The Festool TS 75 EQ-F-Plus is a heavy-duty plunge-cut track saw engineered for maximum capacity and power. Equipped with an 8-1/4 in. (210 mm) blade and a 1,600W motor, the TS 75 cuts through stock up to 2-3/4 in. thick on a guide rail (3 in. off rail). It effortlessly slices through thick solid hardwood slabs, exterior entry doors, structural insulated panels, and stacked sheet goods in a single pass.

Built to handle heavy loads, the TS 75 incorporates a mechanical slip clutch that disengages the drive train if the blade pinches, minimizing kickback risk and protecting internal gears and the motor. MMC electronics maintain constant blade speed under load while providing electronic temperature and overload protection. A spring-loaded riving knife keeps cut kerfs open, retracting smoothly into the housing for interior plunge cuts.

When coupled with Festool FS guide rails, the TS 75 produces laser-straight, burn-free, and splinter-free cuts that are clean enough to glue without intermediate jointer passes. The FastFix spindle lock system engages the arbor bolt and power switch simultaneously, allowing fast and safe blade changes on the jobsite.

Features & Benefits

• Maximum Cutting Depth: Delivers 2-3/4 in. (70 mm) depth of cut on a guide rail and up to 3 in. (75 mm) off-rail for handling thick stock and stacked sheet goods.
• 1,600W Drive Motor: High-torque motor provides continuous cutting power through the densest hardwoods and building timbers without bogging down.
• Integrated Slip Clutch: Mechanical safety clutch minimizes severe kickback shock and protects the gearbox, motor, and blade if binding occurs.
• Spring-Loaded Riving Knife: Keeps kerfs separated behind the cut to prevent blade pinching; retracts flush into the housing during plunge cuts.
• MMC Electronics: Variable speed control with constant speed regulation under load, soft start, and thermal overload protection.
• FastFix Arbor System: Locks the arbor and switch simultaneously for effortless, secure blade changes.
• Pivoting Bevel Range: Bevels smoothly from 0° to 47° with a true pivot design that tracks along the scribed guide rail edge.
• Dual Dust Extraction Port: Swiveling port accepts both 27 mm (1-1/16 in.) and 36 mm (1-7/16 in.) hoses for high-volume chip capture.

What's Included

• (1) Wood Universal HW 210x2,4x30 W36 Circular Saw Blade
• (1) Splinterguard
• (1) Hex Key 5 mm
• (1) Plug-It Power Cord SJO 16 AWG-4 (4 m)
• (1) Systainer³ SYS3 M 437

CT MIDI I HEPA CLEANTEC 4.0 Gal. Compact Dust Extractor, 130 CFM, 1200W, 120V

The Festool CT MIDI I HEPA CLEANTEC is a compact, high-efficiency mobile dust extractor tailored for residential finish carpentry, remodelers, installers, and tradespeople who need full-featured dust extraction in an easily transportable package. Sized with a 4.0-gallon (15-liter) container and weighing just 25.26 lbs., it fits easily into tight workspaces and vehicles while delivering 130 CFM (3,700 l/min) of airflow and 96 in. of static water lift.

Engineered for continuous jobsite productivity, the CT MIDI I incorporates manual filter cleaning: a mechanical de-dusting lever on the front of the unit clears accumulated dust from the filter bag and main filter to restore maximum suction without opening the tub. Additionally, the main HEPA filter cartridge can be accessed and replaced from the outside of the machine in seconds without tools, preventing airborne dust release during filter maintenance.

Operation is managed through an intuitive touch panel with five suction intensity levels. The CT MIDI I features built-in Bluetooth technology for automated start/stop functionality with Festool cordless batteries or remote switches, alongside a tool-triggered electrical outlet for corded tools. A deep internal hose garage completely encloses the smooth, conical antistatic hose, and the flat upper surface with T-LOC SYS-Dock allows Systainers to latch securely on top.

Features & Benefits

• Ultra-Compact & Portable: Lightweight 25.26 lb. footprint with balanced handle and rugged rolling chassis designed for easy transport up stairs and through finished interiors.
• Manual Filter Cleaning: Mechanical dedusting lever shakes out fine dust from the filter bag to restore full suction power without opening the extractor.
• External Main Filter Replacement: Access and swap the HEPA filter directly from the exterior without tools, avoiding exposure to captured dust.
• HEPA Filtration Standard: Traps fine particulates down to 0.3 microns, protecting lungs and supporting dust-free work environments.
• Touch-Control Interface: Responsive touch panel replaces mechanical dials, offering five selectable suction levels and automatic tool mode.
• Integrated Bluetooth Technology: Communicates wirelessly with Festool Bluetooth battery packs or optional remote switches for automatic extraction.
• Tool-Triggered Power Outlet: Grounded onboard socket automatically starts and stops the extractor in tandem with corded electric tools.
• Smooth Antistatic Hose: Tapered 27/32 mm hose reduces air friction, maximizes suction, and glides over obstacles without snagging surfaces.
• Internal Hose Garage: Recessed storage bay completely swallows the suction hose and power cord for clean, self-contained transport.
• LevelStop Wet Extraction: Liquid sensor automatically shuts off the motor during wet pickup to prevent container overfill (requires optional wet filter).
• Flat Systainer Top: Flat upper deck provides a convenient staging surface for hand tools and secures Festool Systainers via T-LOC docking.

What's Included

• (1) HEPA Main Filter (HEPA-HF-CT COMP, pre-installed)
• (1) SELFCLEAN Filter Bag SC-FIS
• (1) Smooth Antistatic Suction Hose (D 27/32 mm x 3.5 m with rotating angle adapter)

75 in. Guide Rail FS 1900/2

The Festool FS 1900/2 is a 75 in. (1,900 mm) precision extruded aluminum guide rail designed to guide Festool plunge-cut track saws, routers, and jigsaws. Engineered to deliver dead-straight, splinter-free cuts up to 69 in. (1,750 mm) long, the FS 1900/2 provides the ideal working length for sizing commercial interior doors, cutting countertop joints, trimming paneling, and handling intermediate rips without combining smaller rails.

The rail incorporates a replaceable translucent rubber splinterguard directly along the reference cutting edge. On its inaugural cut, the saw blade cuts the splinterguard to match the exact kerf width, establishing a precise zero-clearance cutting edge that eliminates tearout on both sides of the cut and serves as an exact alignment guide against pencil layout lines. On the underside, dual rubber grip strips provide friction against smooth surfaces, keeping the rail planted during cuts without the need for clamps on many sheet goods.

Low-friction slideway strips on top allow the saw or router base to glide smoothly along the rail with minimal effort and no binding. The precision guidance rib fits directly into the grooved baseplates of Festool saws, and the integrated underside T-slot accepts screw clamps (FSZ 120/300), one-handed quick clamps (FS-HZ 160, FS-EZ 150/2), angle stops, and connecting bars for extending capacity.

Features & Benefits

• Extended 75 in. Working Length: Provides continuous, seamless guidance for cuts up to 69 in. (1,750 mm) long without requiring rail connectors.
• Laser-Straight Cuts: Rigid extruded aluminum profile ensures deflection-free saw tracking for glue-ready edge cuts.
• Integrated Splinterguard: Factory-installed rubber edge aligns with the cut line, preventing chipping and blowout on delicate wood veneers and high-pressure laminates.
• Dual Non-Skid Underside Strips: Grips smooth sheet materials firmly, reducing setup time by eliminating the need for clamping on horizontal cuts.
• Low-Friction Glide Strips: Top-mounted polymer strips ensure smooth, continuous tool travel for consistent feed rates and chatter-free finishes.
• Zero-Play Guidance Rib: Mates with adjustable baseplate jaws on Festool plunge-cut saws for wobble-free accuracy.
• Underside Accessory T-Slot: Accommodates Festool manual and rapid clamps, limit stops, and FSV connecting bars.
• System Compatibility: Works seamlessly with all Festool track saws (TS 55, TS 60 K, TSV 60 K, TS 75), OF routers, and jigsaw guide attachments.

What's Included

• (1) Festool FS 1900/2 75 in. Guide Rail (Pre-Installed Splinterguard, Glide Strips, and Non-Skid Underside Strips)

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.