8-1/4 in. Plunge-Cut Track Saw TS 75 EQ-F-Plus, 3 in. Cut Depth, 1600W, 120V

The Festool TS 75 EQ-F-Plus is a heavy-duty plunge-cut track saw engineered for maximum capacity and power. Equipped with an 8-1/4 in. (210 mm) blade and a 1,600W motor, the TS 75 cuts through stock up to 2-3/4 in. thick on a guide rail (3 in. off rail). It effortlessly slices through thick solid hardwood slabs, exterior entry doors, structural insulated panels, and stacked sheet goods in a single pass.

Built to handle heavy loads, the TS 75 incorporates a mechanical slip clutch that disengages the drive train if the blade pinches, minimizing kickback risk and protecting internal gears and the motor. MMC electronics maintain constant blade speed under load while providing electronic temperature and overload protection. A spring-loaded riving knife keeps cut kerfs open, retracting smoothly into the housing for interior plunge cuts.

When coupled with Festool FS guide rails, the TS 75 produces laser-straight, burn-free, and splinter-free cuts that are clean enough to glue without intermediate jointer passes. The FastFix spindle lock system engages the arbor bolt and power switch simultaneously, allowing fast and safe blade changes on the jobsite.

Features & Benefits

• Maximum Cutting Depth: Delivers 2-3/4 in. (70 mm) depth of cut on a guide rail and up to 3 in. (75 mm) off-rail for handling thick stock and stacked sheet goods.
• 1,600W Drive Motor: High-torque motor provides continuous cutting power through the densest hardwoods and building timbers without bogging down.
• Integrated Slip Clutch: Mechanical safety clutch minimizes severe kickback shock and protects the gearbox, motor, and blade if binding occurs.
• Spring-Loaded Riving Knife: Keeps kerfs separated behind the cut to prevent blade pinching; retracts flush into the housing during plunge cuts.
• MMC Electronics: Variable speed control with constant speed regulation under load, soft start, and thermal overload protection.
• FastFix Arbor System: Locks the arbor and switch simultaneously for effortless, secure blade changes.
• Pivoting Bevel Range: Bevels smoothly from 0° to 47° with a true pivot design that tracks along the scribed guide rail edge.
• Dual Dust Extraction Port: Swiveling port accepts both 27 mm (1-1/16 in.) and 36 mm (1-7/16 in.) hoses for high-volume chip capture.

What's Included

• (1) Wood Universal HW 210x2,4x30 W36 Circular Saw Blade
• (1) Splinterguard
• (1) Hex Key 5 mm
• (1) Plug-It Power Cord SJO 16 AWG-4 (4 m)
• (1) Systainer³ SYS3 M 437

CT 26 EI HEPA CLEANTEC 6.9 Gal. Dust Extractor, 138 CFM, 1200W, 120V

The Festool CT 26 EI HEPA CLEANTEC is a versatile mobile dust extractor engineered for workshop machinery and jobsite surface preparation. Featuring a 6.9-gallon (26-liter) container capacity, it combines a compact footprint with high-volume collection capacity for sanding, sawing, routing, and general cleanup. Its high-performance turbine generates 138 CFM (3,900 l/min) of airflow and 96 in. of static water lift, capturing fine dust particles directly at the tool before they become airborne.

Designed for streamlined operation, the CT 26 EI replaces traditional rotary knobs with an intuitive touch-control panel that allows quick selection across five suction levels, even while wearing work gloves. Integrated Bluetooth technology enables automatic wireless startup when paired with Festool Bluetooth battery packs or an optional remote control, eliminating trips across the workspace to activate the vacuum. For corded tools, an integrated grounded receptacle provides tool-triggered automatic start and stop.

The extractor features a flat HEPA filter design and smooth internal container contours that allow the SELFCLEAN fleece filter bag to expand fully, utilizing virtually 100% of the container volume without premature clogging. An integrated hose garage encloses the smooth, conical antistatic suction hose during transit, and the top-mounted SYS-Dock with T-LOC secures Systainers, Sortainers, or a Festool Workcenter directly to the unit for convenient transport.

Features & Benefits

• HEPA Filtration: Traps fine dust particles down to 0.3 microns, maintaining cleaner air and meeting strict workplace dust management standards.
• Touch-Control Interface: Streamlined push-button touch panel replaces mechanical dials for easy adjustment across five suction power settings, even with gloved hands.
• Integrated Bluetooth Technology: Enables automatic remote activation from Festool Bluetooth battery packs or an optional hose-mounted remote control.
• Tool-Triggered Operation: Onboard electrical outlet provides automatic start/stop functionality synchronized with connected corded power tools.
• Smooth Antistatic Hose: Tapered 27/32 mm hose prevents static charge accumulation and glides smoothly across edges without catching or binding on workpieces.
• High-Performance Turbine: Produces 138 CFM of volume flow and 96 in. of static water lift for strong suction during heavy sanding and cutting applications.
• Full Volume Utilization: Space-saving flat filter sits above the tub, allowing the self-cleaning filter bag to fill completely without losing suction capacity.
• T-LOC SYS-Dock: Provides a rigid docking platform for latching Festool Systainer tool cases, pre-separators, or work centers directly to the extractor.
• LevelStop Wet Shut-Off: Built-in liquid sensors automatically cut power to the turbine when container water levels reach capacity, safeguarding the motor during wet pickup.
• Jobsite Mobility: Sturdy steel-axle chassis with large rear wheels, swiveling front casters, and a foot-actuated locking brake ensures stable placement and effortless maneuvering.
• Organized Cable Storage: Folding cord wrap mechanism enables rapid deployment and tidy, snag-free storage of the 25 ft. power cord.

What's Included

• (1) HEPA Main Filter (HEPA-HF-CT26/36/48 PTFE)
• (1) SELFCLEAN Fleece Filter Bag
• (1) Smooth Antistatic Suction Hose (D 27/32 mm x 3.5 m with rotating angle adapter)

75 in. Guide Rail FS 1900/2

The Festool FS 1900/2 is a 75 in. (1,900 mm) precision extruded aluminum guide rail designed to guide Festool plunge-cut track saws, routers, and jigsaws. Engineered to deliver dead-straight, splinter-free cuts up to 69 in. (1,750 mm) long, the FS 1900/2 provides the ideal working length for sizing commercial interior doors, cutting countertop joints, trimming paneling, and handling intermediate rips without combining smaller rails.

The rail incorporates a replaceable translucent rubber splinterguard directly along the reference cutting edge. On its inaugural cut, the saw blade cuts the splinterguard to match the exact kerf width, establishing a precise zero-clearance cutting edge that eliminates tearout on both sides of the cut and serves as an exact alignment guide against pencil layout lines. On the underside, dual rubber grip strips provide friction against smooth surfaces, keeping the rail planted during cuts without the need for clamps on many sheet goods.

Low-friction slideway strips on top allow the saw or router base to glide smoothly along the rail with minimal effort and no binding. The precision guidance rib fits directly into the grooved baseplates of Festool saws, and the integrated underside T-slot accepts screw clamps (FSZ 120/300), one-handed quick clamps (FS-HZ 160, FS-EZ 150/2), angle stops, and connecting bars for extending capacity.

Features & Benefits

• Extended 75 in. Working Length: Provides continuous, seamless guidance for cuts up to 69 in. (1,750 mm) long without requiring rail connectors.
• Laser-Straight Cuts: Rigid extruded aluminum profile ensures deflection-free saw tracking for glue-ready edge cuts.
• Integrated Splinterguard: Factory-installed rubber edge aligns with the cut line, preventing chipping and blowout on delicate wood veneers and high-pressure laminates.
• Dual Non-Skid Underside Strips: Grips smooth sheet materials firmly, reducing setup time by eliminating the need for clamping on horizontal cuts.
• Low-Friction Glide Strips: Top-mounted polymer strips ensure smooth, continuous tool travel for consistent feed rates and chatter-free finishes.
• Zero-Play Guidance Rib: Mates with adjustable baseplate jaws on Festool plunge-cut saws for wobble-free accuracy.
• Underside Accessory T-Slot: Accommodates Festool manual and rapid clamps, limit stops, and FSV connecting bars.
• System Compatibility: Works seamlessly with all Festool track saws (TS 55, TS 60 K, TSV 60 K, TS 75), OF routers, and jigsaw guide attachments.

What's Included

• (1) Festool FS 1900/2 75 in. Guide Rail (Pre-Installed Splinterguard, Glide Strips, and Non-Skid Underside Strips)

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.