5 in. Random Orbital Sander ETS 125 REQ-Plus, 5/64 in. Stroke, 250W, 120V

The Festool ETS 125 REQ-Plus is a compact and lightweight 5 in. random orbital sander designed for one-handed operation. With a tight 5/64 in. (2 mm) sanding stroke, this tool excels at fine and super-fine sanding tasks, including finish sanding on natural wood, veneer, and clear coats.

Driven by a 250W motor with step-less variable speed, the ETS 125 maintains consistent RPM under load for fast, smooth material removal. A built-in sanding pad brake quickly stops the pad from spinning freely, allowing you to set the tool down safely without marring freshly finished workpieces. The balanced Vibration-Stop design and ergonomic grip minimize fatigue during vertical and overhead use.

Features & Benefits

• 5/64 in. Sanding Stroke: Produces exceptionally fine finish results with minimal swirl marks.
• Sanding Pad Brake: Quickly stops the pad from spinning freely to prevent scratches when lifting or setting the tool down.
• Vibration-Stop Balancing: Delivers smooth operation and better finish results while reducing hand and arm fatigue.
• Jetstream Dust Extraction: Highly efficient dust removal results in cleaner air, better finishes, and longer abrasive life.
• Step-Less Variable Speed: Easily adjust operating speeds to match the material and application.
• StickFix Hook & Loop: Resilient pad hooks and hard-wearing fabric backing make abrasive changes fast and reliable.
• Plug-It Power Cord: Detachable power cord allows quick transitions between compatible Festool tools.

What's Included

• (1) StickFix Soft Sander Backing Pad (5 in. / 125 mm)
• (1) Edge Protector
• (1) Long-Life Chip Collection Bag
• (1) Plug-It Power Cord
• (1) Systainer SYS3 M 187

CT MIDI I HEPA CLEANTEC 4.0 Gal. Compact Dust Extractor, 130 CFM, 1200W, 120V

The Festool CT MIDI I HEPA CLEANTEC is a compact, high-efficiency mobile dust extractor tailored for residential finish carpentry, remodelers, installers, and tradespeople who need full-featured dust extraction in an easily transportable package. Sized with a 4.0-gallon (15-liter) container and weighing just 25.26 lbs., it fits easily into tight workspaces and vehicles while delivering 130 CFM (3,700 l/min) of airflow and 96 in. of static water lift.

Engineered for continuous jobsite productivity, the CT MIDI I incorporates manual filter cleaning: a mechanical de-dusting lever on the front of the unit clears accumulated dust from the filter bag and main filter to restore maximum suction without opening the tub. Additionally, the main HEPA filter cartridge can be accessed and replaced from the outside of the machine in seconds without tools, preventing airborne dust release during filter maintenance.

Operation is managed through an intuitive touch panel with five suction intensity levels. The CT MIDI I features built-in Bluetooth technology for automated start/stop functionality with Festool cordless batteries or remote switches, alongside a tool-triggered electrical outlet for corded tools. A deep internal hose garage completely encloses the smooth, conical antistatic hose, and the flat upper surface with T-LOC SYS-Dock allows Systainers to latch securely on top.

Features & Benefits

• Ultra-Compact & Portable: Lightweight 25.26 lb. footprint with balanced handle and rugged rolling chassis designed for easy transport up stairs and through finished interiors.
• Manual Filter Cleaning: Mechanical dedusting lever shakes out fine dust from the filter bag to restore full suction power without opening the extractor.
• External Main Filter Replacement: Access and swap the HEPA filter directly from the exterior without tools, avoiding exposure to captured dust.
• HEPA Filtration Standard: Traps fine particulates down to 0.3 microns, protecting lungs and supporting dust-free work environments.
• Touch-Control Interface: Responsive touch panel replaces mechanical dials, offering five selectable suction levels and automatic tool mode.
• Integrated Bluetooth Technology: Communicates wirelessly with Festool Bluetooth battery packs or optional remote switches for automatic extraction.
• Tool-Triggered Power Outlet: Grounded onboard socket automatically starts and stops the extractor in tandem with corded electric tools.
• Smooth Antistatic Hose: Tapered 27/32 mm hose reduces air friction, maximizes suction, and glides over obstacles without snagging surfaces.
• Internal Hose Garage: Recessed storage bay completely swallows the suction hose and power cord for clean, self-contained transport.
• LevelStop Wet Extraction: Liquid sensor automatically shuts off the motor during wet pickup to prevent container overfill (requires optional wet filter).
• Flat Systainer Top: Flat upper deck provides a convenient staging surface for hand tools and secures Festool Systainers via T-LOC docking.

What's Included

• (1) HEPA Main Filter (HEPA-HF-CT COMP, pre-installed)
• (1) SELFCLEAN Filter Bag SC-FIS
• (1) Smooth Antistatic Suction Hose (D 27/32 mm x 3.5 m with rotating angle adapter)

Granat 5 in. D125 Abrasives 100-Piece Assortment with Systainer3 SYS3 M 112

The Festool 578193 Granat D125 Abrasives Systainer Set delivers an organized, mobile storage system stocked with 100 high-performance 5 in. (125 mm) sanding discs. Covering five essential grit stages from P60 coarse stock prep up to P220 pre-stain finish sanding, this set ensures professional finishers, remodelers, and cabinetmakers always have the required abrasive on hand.

Festool Granat abrasives are engineered with premium hardened aluminum oxide and synthetic resin bonding, specially treated with an anti-clogging stearate coating. This formulation resists clogging when sanding modern VOC paints, scratch-resistant synthetic clear coats, plastic laminates, and dense repair fillers. The integrated dust-extraction hole pattern aligns with Festool 125 mm sanding pads to pull dust directly into the extractor stream, improving surface visibility and extending abrasive life.

The included Systainer3 SYS3 M 112 keeps all 100 discs sorted into dedicated compartments by grit, protecting fragile disc edges from crimping, moisture, and fine workshop airborne dust. The case stacks and locks onto Festool CT dust extractors and connects with all generations of Systainers for organized, efficient jobsite transport.

Features & Benefits

• Complete 5-Stage Range: 100 total discs across P60, P80, P120, P180, and P220 grits supply a complete progression from coarse wood leveling to finish sanding.
• Granat Anti-Clogging Coat: Specially treated surface prevents premature loading on tough clear coats, synthetic polymers, primers, and fillers.
• Dedicated 5-Slot Organizer: Custom-molded internal insert keeps each grit size separated and upright for instant identification and replenishment.
• StickFix System: High-grip hook-and-loop backing allows immediate disc swaps and reliable retention under heavy eccentric sanding loads.
• Rugged Systainer3 Shell: Protects abrasives from bending, physical impacts, and water spray during transport in service vehicles.
• System Mobility: Latches directly onto Festool CT mobile dust extractors, SYS-Roll carts, and any Systainer3 or T-LOC storage unit.

What's Included

• (20) Granat D125 P60 Sanding Discs
• (20) Granat D125 P80 Sanding Discs
• (20) Granat D125 P120 Sanding Discs
• (20) Granat D125 P180 Sanding Discs
• (20) Granat D125 P220 Sanding Discs
• (1) 5-Compartment Abrasive Insert
• (1) Systainer3 SYS3 M 112 Storage Case

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.