Bosch 1/2 x 13 in. SDS-plus Speed Clean Dust-Extraction Bit

Bosch Speed Clean drill bits are built using a solid piece of steel with a dust channel that's milled to Bosch specifications to extract dust while drilling, creating 25 percent greater drilling speed. The dust extraction bit system saves time, saves money and produces 90% less dust than traditional drilling methods. The bit life is comparable to the life of Bosch Bulldog SDS-plus bits. Solid carbide tips are embedded in a steel head with robust two-cutter geometry enhancing bit speed and life. The Speed Clean bit, connected to vacuum system, installs adhesive anchors up to 50% faster when compared with the standard hand-cleaning method. A proprietary Bosch design allows dust and debris to be removed through the milled center of the bit. The system is optimized for adhesive anchoring applications, working with Simpson Strong-Tie AT-XP anchoring adhesive and Set-XP high-strength anchoring adhesive, which require higher clean-hole standards. Dust reduction, which reduces friction on the bit, also increases drilling speed by 25%. A rubber adapter is provided with every Bosch Speed Clean bit. The system also reduces airborne silica dust, a known contributor to respiratory illnesses.

Features:

• Hollow drill bit - connects to a vacuum system to deliver up to 50% time savings versus the conventional drill-blow-brush-blow anchor-installation method
• Faster drilling - provides up to 25% greater drilling speed thanks to less dust and reduced friction
• Great durability - one-piece design offers comparable life to Bosch Bulldog bits
• Part of a dust-reduction engineered solution - inluded rubber adapter and bit works with a vacuum system to manage airborne silica dust
• Optimized for adhesive anchoring - works with Simpson Strong-Tie AT-XP anchoring adhesive and Set-XP high-strength anchoring adhesive

Specifications:

• Bit Diameter: 1/2"
• Bit Material: High Carbon Steel
• Bit Type: Masonry
• Case Included: No
• Color Coded: No
• Etched / Stamped Size Identification: Yes
• Shank Style: SDS-Plus

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.