The BluShield The Slayer PWHY38200-CP is a continuous 3/8 in. x 200 ft. hybrid pressure washing hose assembly built for 3500 PSI heavy-duty cleaning tasks. Engineered specifically for commercial contractors, multi-story exterior washers, agricultural facilities, and truck fleet operations, this 200-foot continuous hose eliminates the need to couple multiple shorter sections together, removing leak-prone mid-line fittings and internal flow restrictions.

At 200 feet, conventional rubber hose becomes extraordinarily heavy and fatiguing to manage. The Slayer resolves this with an advanced hybrid polymer formulation that makes the assembly 20% lighter than standard rubber hoses while retaining maximum abrasion and weather resistance. The hose lays flat with zero memory straight off the hose reel or ground coil, minimizing kinks and snagging around building corners and tires.

The non-marking blue jacket protects high-end vehicle paint, masonry, siding, and painted decking from abrasive black streaks. High-tensile braided polyester reinforcement delivers a 10,500 PSI burst rating (3:1 safety margin) to easily withstand pressure surges and unloader spikes. Equipped with solid brass 3/8 in. male NPT fittings, quick-connect coupler and plug hardware, and heavy-duty molded bend restrictors, it handles all-weather washing from 25°F to 140°F.

Features & Benefits

• 200 ft. Continuous Reach: Clean expansive roofs, high building facades, and long industrial vehicle lines without moving the pressure washer.
• No Mid-Line Couplings: Eliminates pressure drops, snag hazards, and potential leak points caused by joining multiple shorter hoses.
• 3500 PSI Commercial Working Pressure: Provides consistent cleaning power across the entire 200-foot span.
• 10,500 PSI Burst Safety Factor: 3:1 safety margin absorbs sudden pressure spikes when trigger guns are released or shut off.
• 20% Lighter Weight: Drastically cuts down operator drag resistance and hauling strain across extensive properties.
• Zero-Memory Lay-Flat Design: Manages easily on manual or powered hose reels and pulls out straight without persistent loops.
• Non-Marking Outer Cover: Safeguards sensitive architectural surfaces, vehicles, and sidewalks from rubber skid marks.
• Hot-Water Rating to 140°F: Operates seamlessly with cold-water units as well as hot-water systems up to 140°F.
• Machined Solid Brass Connections: 3/8 in. Male NPT threads provide airtight, watertight seals that resist corrosion.
• Included Quick-Connect Coupler and Plug: Pre-packaged with 3/8 in. quick-connect fittings for immediate job-site readiness.
• Protective Bend Restrictors: Integrated bend guards at both couplings prevent stress fractures and kinking at high-flex connection zones.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.