The BluShield The Slayer PWHY14200 is a 1/4 in. inside diameter by 200 ft. hybrid pressure washing hose assembly rated for working pressures up to 3500 PSI. Designed for large-scale agricultural facilities, commercial fleet wash bays, multi-acre estates, and stationary industrial skid installations, this 200 ft. hose provides maximum cleaning reach without relocating the power unit.

Built with an internal PVC tube, high-tensile braided polyester reinforcement, and a hybrid polymer outer cover, the hose delivers rubber-like flexibility while remaining 20% lighter than standard rubber hoses. Over a 200 ft. continuous span, this weight reduction substantially decreases drag resistance and operator fatigue during hose deployment and retrieval. The hybrid compound lays flat under line pressure, resisting memory coils and preventing flow-restricting kinks over long fluid runs.

The non-marking blue outer cover protects painted vehicle bodies, siding, decorative concrete, and architectural surfaces from abrasion and scuff marks. Solid brass M22 threaded fittings on both ends feature internal dual seals to maintain pressure containment and prevent fluid leaks. Four-finger bend restrictor boots reinforce the hose-to-coupling transitions, minimizing mechanical stress and preventing kinks at the pump and spray lance connections.

Features & Benefits

• 3500 PSI Working Pressure: Delivers long-distance fluid delivery for high-pressure operations with a 10,500 PSI burst rating (3:1 safety margin).
• Hybrid Polymer Construction: Combines an inner PVC tube with a hybrid polymer jacket, delivering rubber-like flexibility at 20% less weight.
• Kink-Resistant Lay-Flat Performance: Lays flat across long distances without looping or twisting under pressure, maintaining uninterrupted flow.
• Non-Marking Blue Outer Cover: Protects vehicle finishes, masonry, and painted surfaces against rubber transfer and dragging marks.
• Hot-Water Rated to 140 deg. F: Suitable for operations from 25 deg. F to 140 deg. F, supporting both cold-water and hot-water pressure washers.
• Solid Brass M22 Threaded Fittings: Machined solid brass couplings with dual-seal inserts provide corrosion resistance and leak-free mechanical seals.
• Four-Finger Bend Restrictors: Formed strain-relief sleeves protect hose ends from severe bending and premature fatigue cracking.
• Polyester Braided Reinforcement: High-tensile woven reinforcement withstands cyclic pressure spikes across the full 200 ft. run.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.