The BluShield The Slayer PWHY12100 is a high-capacity 1/2 in. x 100 ft. hybrid pressure washing hose assembly rated for 3500 PSI working pressure. Built specifically for high-GPM commercial contractors, municipal wash crews, agricultural cleaning, and trailer-mounted pressure washing rigs, this 100-foot continuous hose provides the extended perimeter reach required for large wash jobs while maintaining high water flow volume with minimal friction loss.

Traditional 100-foot, 1/2-inch rubber hoses are heavy and difficult to maneuver. The Slayer solves this operational challenge through an advanced hybrid polymer outer cover over a smooth PVC inner core, yielding an assembly that is approximately 20% lighter than standard rubber pressure hoses. It exhibits true zero memory, lying completely flat upon unspooling and resisting the twisting, corkscrewing, and kinking that slows down operators on job sites.

The blue outer jacket is non-marking and abrasion-resistant, protecting delicate exterior siding, finished vehicles, and concrete surfaces from black transfer marks. Threaded with solid brass 1/2 in. male NPT fittings at each end, the hose connects securely to commercial pump manifolds, unloader blocks, and industrial hose reels. Dual molded bend restrictors relieve bending stress at connection points, and all-weather formulation ensures dependable flexibility between 25°F and 140°F.

Features & Benefits

• 100 ft. Continuous High-Flow Reach: Reaches across large work areas, fleet yards, and commercial facilities without reducing GPM flow.
• 1/2 in. Inside Diameter: Minimizes line backpressure and friction loss on high-output machines delivering 5 to 10+ GPM.
• 3500 PSI Working Pressure: Handles industrial-grade pressure washing demands across cold- and hot-water applications.
• 10,500 PSI Burst Margin: 3:1 safety factor protects against catastrophic hose failure caused by sudden pressure spikes or valve cycling.
• 20% Weight Reduction: Significant weight savings over 1/2 in. rubber hoses makes pulling and coiling 100 feet much easier on operators.
• Zero-Memory Lay-Flat Flexibility: Unrolls straight off reels and lays flat without coiling or kinking.
• Non-Marking Blue Outer Cover: Keeps concrete driveways, painted equipment, and commercial decks free of black rubber friction marks.
• Hot-Water Compatible to 140°F: Engineered to withstand hot-water service up to 140°F without cover degradation.
• Machined Solid Brass 1/2 in. NPT Fittings: Heavy-duty male NPT connections deliver reliable, leak-resistant threading under high operating vibration.
• Integrated Molded Bend Restrictors: Prevents sharp bends and premature hose wall fatigue directly behind the crimped couplings.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.