The BluBird AG-Lite ALHYW5850-HV is a 5/8 in. inside diameter by 50 ft. long hybrid water hose built for high-demand agricultural, commercial, landscaping, and construction washdown applications. Delivering 50 ft. of continuous reach from a single spigot, this hose is the primary general-purpose standard for farm facilities, nursery watering, fleet maintenance, and facility grounds management.

Constructed with an advanced hybrid PVC-rubber formulation, the hose provides the extreme pliability and kink-resistance of heavy rubber while remaining 40% lighter at approximately 8.6 lbs. This makes dragging across lawns, gravel paths, and concrete bays significantly less labor-intensive. Built-in 360-degree swivel couplings neutralize torque along the entire 50 ft. run, eliminating twisting, loops, and kinks during unwinding. Molded four-finger hex-grip bend restrictors cushion the hose at both ends, preventing sharp kinking and material fatigue at the fittings.

The vivid high-visibility yellow cover stands out prominently across all terrains, significantly reducing tripping hazards on busy commercial sites and lowering the risk of vehicle drive-over damage. A robust polyester braided inner layer supports 150 PSI working pressure and 500 PSI burst strength, sustaining high flow rates of approximately 54 GPM at 100 PSI. Its rugged cover resists abrasion, ozone, and UV rays, ensuring full all-season performance from 14 F to 140 F.

Features & Benefits

• Hybrid PVC-Rubber Compound: Offers full rubber flexibility with 40% less weight to reduce operator strain during long-distance dragging.
• In-Built 360-Degree Swivel Fitting: Prevents hose twisting, loops, and kinks across the entire 50 ft. length for hassle-free handling and smooth water flow.
• Four-Finger Hex Grip Bend Restrictor: Prevents tight-radius crimping and fatigue failure at the coupling junctions under tension.
• High-Visibility Yellow Finish: Delivers superior jobsite safety by increasing visibility against grass, mud, and pavement to mitigate tripping hazards.
• High Flow Water Delivery: Engineered to deliver approximately 54 GPM at 100 PSI, supporting rapid equipment washdown and agricultural watering.
• 150 PSI Working / 500 PSI Burst Rating: Sustains heavy municipal and commercial booster pump pressure without wall ballooning.
• Polyester Braided Core: Provides high-tensile internal reinforcement for pressure stability and long service life.
• Extreme Weather Flexibility: Remains supple, easy to manage, and simple to coil in ambient temperatures from 14 F to 140 F.
• Abrasion, UV, and Ozone Resistant Cover: Resists scuffing, sun exposure, and weathering in tough outdoor environments.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.