The BESSEY KRE3550 K BODY REVOlution parallel clamp provides a 50 in. clamping capacity and 3-3/4 in. throat depth engineered for long tabletop assemblies, expansive cabinet carcasses, and architectural millwork. Large parallel jaw faces clamping at 90 degrees to the bar prevent workpiece bowing and ensure flat, square glue lines across long spans.

Constructed with German profiled steel rail stock, the tool provides 1,700 lbs. of nominal clamping force and a load limit of 2,200 lbs. Its ergonomic handle features a 6 mm steel hex socket on the end, giving woodworkers the option to use a hex key to achieve up to 12.5 lb-ft (17 Nm) of max torque. The operating jaw stays positioned during setup for smooth workpiece loading, and the unit converts to a spreading tool without tools.

Features & Benefits

• 1,700 lb. Nominal Clamping Force: Rated for 1,700 lbs. of nominal clamping force and 2,200 lbs. load limit across a 50 in. capacity.
• 90-Degree Parallel Jaws: Broad parallel jaws hold exact 90-degree alignment to the rail stock for flat panel glue-ups.
• Integrated 6 mm Hex Socket: Built-in steel hex socket in the handle accepts a 6 mm key for up to 12.5 lb-ft (17 Nm) torque.
• German Profiled Steel Rail: High-grade profiled steel bar stock resists bending during full-capacity clamping.
• Tool-Free Spreader Conversion: Easily converts into a spreader tool without requiring extra tooling.
• Position-Holding Operating Jaw: Sliding jaw remains fixed on the bar until clamped, enabling easy one-person setup.
• Replaceable Protective Pads: Protective jaw covers prevent clamping indentation on finished wood stock.

The 50 in. KRE3550 is suited for large dining table tops, island cabinets, and pantry frames. For shorter cabinet builds, consider the 24 in. (KRE3524) or 40 in. (KRE3540) models; for extreme spans, choose up to 98 in. (KRE3598).

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.