141171 Jet PTW-2042, 20in x 42in 6600-lb. Capacity Pallet Truck

JET® PTW Series Pallet Trucks are available in 5 different configurations. Each JET PTW Pallet Truck has a low profile of 2-7/8 inches, varying widths of 20 to 27 inches, and different lengths from 36 to 48 inches. High quality welded steel construction gives the PTW series a capacity of 6,600 pounds. The 200 degree turning radius increases maneuverability and the easy-to-use fingertip controls permit single handed operation. JET PTW Series Pallet Trucks are built to handle heavy lifting.

Features:

• Capacity: 6,600 pounds
• Turning Radius: 200 degrees
• Overload Protection prevents lifting loads past maximum capacity
• Lower material in a controlled decent with either hand or foot control for operator convenience
• Pump designed so that cylinder will not extend beyond maximum height
• Pumps designed for any industrial environment
• Polyurethane 6-1/4 x 2 inch steer wheels for non marking of floors and quieter rolling

Specifications:

• Overall Dimensions (L x W x H) (In.) 57 x 50-1/2 x 48
• Capacity (Lbs.) 6600
• Overall Fork Dimensions (L x W) (In.) 42 x 20-1/2
• Steer Wheel Size (In.) 6-1/4 x 2
• Fork Width (In.) 6-1/4
• Load Wheel Size (OD x W) (In.) 2-7/8 x 3-11/16
• Maximum Height (In.) 7-1/2
• Lowered Height (In.) 2.95
• W1 Fork Width (In) 6-1/4
• W2 Overall Width (In) 20-1/2
• L1 Fork Length (In) 42
• L2 Overall Length (In) 57
• H1 Max. Raised Height (In) 7-1/2
• H2 Min. Raised Height (In) 2-19/20
• A Steer Wheel Dimensions (In) 6-1/4 x 2
• B Fork Wheel Dimensions (In) 2-7/8 x 3-11/16
• C Overall Height (In) 48
• Weight (Lbs) 132
• Turning Radius (Deg) 200
• Force Required to Pump @ Maximum Load (Lbs) 88
• Force Required to Move Maximum Load (Lbs) 150
• Number of Strokes to Reach Maximum Height 13

Red Assurance 2-year Warranty:

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.