Skil 15 Amp 10 in. Table Saw TS6307-00
Skil 15 Amp 10 in. Table Saw TS6307-00
Low stock
Couldn't load pickup availability
Details
Details
15 Amp 10" Table Saw by SKIL
The SKIL TS6307-00 10" Jobsite Table Saw has a 25-1/2" (64.77cm) Rip Capacity and is equipped with a 15-Amp motor, integrated foldable legs, rack & pinion fence rails, and a dust port elbow to keep your jobsite clean. The 15-Amp motor quickly rips through hardwoods with ease, while the rack & pinion fence rails make fence adjustments fast, smooth, and accurate. With its 0-45° bevel capacity, the quick release lever allows for cuts between two positive stops at 0 and 45 degrees, and its 4x4 cutting capacity allows for swift 90-degree cutting. The integrated foldable legs seamlessly form into a folding stand to provide portability and convenience, while the dust port elbow systematically redirects dust to a container for easy cleanup. The parallel blade alignment allows for ease of blade adjustment along the rip fence and miter slot, for precise accurate cuts. This table saw features a safety anti-restart switch in case of power outages. This large coated cast aluminum tabletop saw comes equipped with a 10" 24-tooth carbide blade. When using a dado insert, this table saw requires an 8 in. dado blade set.
Features:
- DUST PORT ELBOW — Redirects dust to a container for easy cleanup
- -2-47° BEVEL CAPACITY — Cuts between two positive stops at 0 and 45 degrees with quick release lever
- RACK AND PINION FENCE RAILS — Ensures fence stays parallel to blade for fast, smooth, and accurate cuts
- INTEGRATED FOLDING STAND — Legs quickly fold in to provide portability and convenient storage
- PARALLEL BLADE ALIGNMENT — Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
- 4x4 CUTTING CAPACITY — Cuts material up to 4x4 at 90 degrees
Specifications:
- Input Voltage & Frequency — 120V
- Table Width (inch) — 24
- Table Length (inch) — 22
- Table Material — Aluminum
- Teeth Of Blade — 24T
- Tool Current Rating — 15
- No Load Speed — 4600
- Max. Width of Dado — 5/8"
- Max. Rip Of Right Of Blade (inch) — 25.5"
- Max. Rip Of Left Of Blade (inch) — 14"
- Max. bevel angle — -2°~47°
- Blade Diameter (inch) — 10"
- Blade Arbor Hole Diameter (inch) — 5/8"
Includes:
- (1) Blade Guard
- (1) Push Stick
- (1) Miter Gauge
- (1) Anti-kick Back Paw
- (1) Dust Port Elbow
- (2) Wrench
- (1)Riving Knife
- (1) Rip Fence
- (1) 24T Blade
- (1) Drive Knob with washer
- (1) Hex Screw
Additional Information:
Specifications
Specifications
| Skil 15 Amp 10 in. Table Saw TS6307-00 | |
| Brand | Skil |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active