Skil 12V Brushless Auto Hammer Kit AH6552A-11
Skil 12V Brushless Auto Hammer Kit AH6552A-11
Hurry up, only 2 items left in stock.
Couldn't load pickup availability
Details
Details
SKIL 12V Brushless Auto Hammer Kit AH6552A-11
The SKIL PWR CORE 12™ Brushless 12V Auto Hammer is a compact and cordless auto hammer for hard-to-reach areas. Whether the job is in a confined, overhead, or dimly lit space, this auto nailer brings power and convenience to the job—hammering nails up to 3.5 inches long. This cordless auto nailer also has a digital brushless motor that delivers a powerful 4,200 IPM for maximum efficiency in a lightweight design. The magnetic collet securely holds nails for convenient one-handed use and proper positioning. And its 3-position adjustable head (0°, 45°, and 90°) hammers at a variety of angles for greater versatility in tight areas. Its compact design includes a lock-off switch to prevent accidental startups and a built-in LED light with after-glow illuminates dimly lit spaces. The included 12V 2.0Ah USB-C battery features two-way rapid charging that allows you to charge the battery or portable devices with its 60W USB-C port. When it's time to recharge the battery, the multifunctional charger ditches the traditional power tool charging dock for a compact, convenient format that can plug in anywhere. The kit includes the cordless auto hammer, 12V 2.0Ah USB-C battery, 20W USB-C charger, charging cable, and belt clip.
Features:
- CORDLESS AUTO HAMMER KIT - Set includes the 12V auto hammer, 12V 2.0Ah USB-C battery, 20W USB-C charger, charging cable, and belt clip
- COMPACT SIZE - The digital brushless motor delivers compact, lightweight power for extended tool life and precise hammering control in hard-to-reach areas
- 3-POSITION ADJUSTABLE HEAD - Switch between 0, 45, or 90 degrees to hammer nails at a variety of angles for any job
- MAGNETIC COLLET - Holds nails (up to 3.5 inches long) in place for one-handed use, especially in hard-to-reach or tight areas like cabinetry
- LED WORKLIGHT - Illuminates work area, with after-glow
- TWO-WAY RAPID CHARGING - Charge the battery or personal devices with the battery's 60W USB-C port
- MULTIFUNCTIONAL 20W CHARGER - Charges USB-C compatible SKIL batteries and other devices
Specifications:
- Voltage (V) — 12 V
- Motor Type — Brushless
- Type — Barrel
- Impact Rate (ipm) — 4200
- Drive Capability — 1" - 3.5" (2d-16d)
- Sleeve Capacity (mm) — 12
- Sleeve Capacity (inch) — 0.47
- Adjustable Head Angle — 0°/45°/90°
Specifications
Specifications
| Skil 12V Brushless Auto Hammer Kit AH6552A-11 | |
| Brand | Skil |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
