9661611, Palmgren Hydraulic Press, 10T, Manual Pump 60in

Palmgren’s Hand Operated H-Frame Press Line consists of 10, 25- and 75-ton presses. Each machine is constructed from heavy duty steel plate that is welded together. The combination of rigid construction and industrial grade hydraulics make Palmgren’s H-Frame presses the ultimate solution for the serious fabrication and machine shop owner who demands the only the best quality from his operation.

Features:

• Pressure gauge for direct pressure readings
• Easily adjustable table for quick height changes between applications
• Holes in side frames allow for insertion of long material
• Hand operation for economic performance
• Efficient hand pump is conveniently located for reduced operator fatigue
• Fully-welded heavy steel plate frame for maximum rigidity
• Factory preset relief valve to prevent exceeding maximum pressure capacity
• By-pass hole prevents excessive ram extension
• Rapid ram return starts as soon as release valve is opened and may be stopped at any point by closing the valve
• Single acting cylinder design for improved operation

Specificaitons:

• Maximum Pressure 10 TON
• Ram Size 6.3 In
• Ram Diameter 1.5 In
• Throat Capacity 19.5 x 11.81 In
• Largest Arbor Extension 6.3 In
• Maximum Work Diameter 19 x 40 In
• Minimum Work Diameter 19 x 0.04 In
• Leverage Radio 400/1 Lbs
• Table Weight 22 Lbs
• Dimensions 23“x17”x60” L x W x H
• Weight 130 kgs

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.