Metabo 5/8" Metal Beveling Tool KFMVP 17-15 F 601771620
Metabo 5/8" Metal Beveling Tool KFMVP 17-15 F 601771620
Low stock
Couldn't load pickup availability
Details
Details
Metabo 5/8" Metal Beveling Tool KFMVP 17-15 F 601771620
The Metabo KFMVP 17-15 F Variable Speed Metal Beveling Tool is designed and manufactured in Germany for fast, clean, and safe weld seem preparation for chamfer heights up to 5/8" at 45°. Its universal milling head with three (3) indexable carbide inserts allows for chamfer angles from 0° to 90°, and the carbide inserts that can be easily switched as needed. Heat produced during the removal process transfers to small metal chips rather than the base material to minimize damage and stress to the work piece. The patented One-Touch controller allows for tool-free depth adjustment in 0.1 mm/0.004" increments to achieve superior results. The motor is equipped with Electronic Speed Stabilization to maintain speed even under load, as well as electronic soft start and power interruption restart protection. A Variable Speed dial allows for adjustment from 6,200-12,600 RPM for working in a variety of materials. The tool is designed with a rear rat-tail handle for comfort and control with a non-locking switch that shuts off the motor when released. An adjustable loop handle on the front of the tool allows for working in multiple positions.
Features:
- LongLife Motor with extended carbon brush life
- One-touch controller. Patented, tool-free setting of the cutting depth in 0.004"/1mm increments; stop points for short setting times and protection against unintentional depth adjustment
- Non-locking switch
- Loop handle adjusts without tools for secure, even guiding
- Electronic soft start and power loss restart protection
- Pipe Following Roller to guide along pipes for easy weld preparation
- Large-surface guide plates for controlled work and precise setting of chamfer angle - 0-90°
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for maintaining almost constant speed even under load
Specifications:
- Model — KFMVP 17-15 F
- No-load speed — 6,200 - 12,000 RPM
- Types of edges — Chamfer
- Max. chamfer width 45° — 13/16"
- Max. chamfer height 45° — 5/8"
- Chamfer angle — 0 - 90°
- Grade of cutting depth setting — 0.004"
- Curves smallest outer diam. — 3-15/16"
Specifications
Specifications
| Metabo 5/8" Metal Beveling Tool KFMVP 17-15 F 601771620 | |
| APPLICATION | Metal Working |
| Brand | Metabo |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL TYPE | Metal Forming |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active