Laguna Tools Bandit 4 Edgebander 220v 3Phase MEB-4/3 NEW
Laguna Tools Bandit 4 Edgebander 220v 3Phase MEB-4/3 NEW
Couldn't load pickup availability
Details
Details
MEB-4/3 NEW, Laguna Bandit 4 Edgebander 220v 3Phase
The Bandit 4 is perfect for cabinet shops that are doing thin edgebanding from 0.4-3mm products. This machine features top/bottom and front/rear edge scraping and buffing. The Bandit 4 also has a swiveling control cabinet that enables you to control the machine during both job setup and edgebanding material.
Features:
- Dual Motor End Trim
- Top & Bottom Trim
- Buffing & Scraping
- Quick Melt Glue System
- 3mm Capacity
Specifications:
- Model: MEB42203
- Feed Speed: 15-23m/min(49-76ft/min)
- Edge Thickness: 0.4-3mm (1/64″ – 1/8″)
- Panel Thickness: 10-60mm
- Panel Length: >150mm
- Working Pressure: 0.6mpa
- Power Requirements: 220V-3PH-60HZ
- Total Power: 9kW (12HP)
- Panel Width: >40mm
- Dust Port Outer Diameter: 98mm (3.85″) x 3
- CFM Requirement: 1000 CFM
- Compressed Air Requirement: 90 PSI, 12 CFM
- Minimum Panel Size (L x W): 300mm x 40mm (11-13/16″ x 1-9/16″) / 150mm x 150mm (5-29/32″ x 5-29/32″)
Specifications
Specifications
| Laguna Tools Bandit 4 Edgebander 220v 3Phase MEB-4/3 NEW | |
| APPLICATION | Wood Working |
| Brand | Laguna Tools |
| DEPTH | 33.5 in |
| HEIGHT | 63.75 in |
| HORSEPOWER | 12 HP |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL TYPE | Edgebanding |
| VOLTAGE | 208V-240V 3Ph |
| WIDTH | 135.75 in |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active

