Laguna Tools Raised Panel Master 5 MDM2050-0148
Laguna Tools Raised Panel Master 5 MDM2050-0148
Couldn't load pickup availability
Details
Details
MDM2050-0148, Laguna Raised Panel Master 5
Laguna is proud to introduce our latest Industrial Series machine, the Raised Panel Master 5. This machine is designed to allow a single operator to produce a complete cabinet door in less than 2 minutes. The single-piece welded steel frame provides the ultimate support for chatter-free work.
The heart of the machine is a shaper spindle that holds all five cutters needed to produce a door. The spindle is powered by a 10 HP motor for smooth cuts and is quickly positioned from the front of the machine with a dial. The turret system insures complete accuracy without test cuts and the pneumatically controlled spindle height is quickly set. The 2 axis sliding table rides on linear bearings in all directions and includes a pneumatic hold-down clamp for quick setup. The pneumatic EZ fence quickly positions the stock for the next cut. A large diameter tracer bearing provides perfect control for straight and curved template following.
Features:
- Motor: 10hp 220v 3-phase w/ VFD
- Speed range: 6000 to 8000 RPM
- Spindle: 1-1/4″ Diameter x 7-1/4″ Height
- Cutter capacity: up to 7″ Diameter
Specifications:
-
Compressed Air Requirement: 90 PSI 1 CFM
-
Dust Port: 5″
-
Maximum Arch Height: 2 Standard
-
Maximum Material Thickness: 1-¼″
-
Maximum Arch Width: 24″
-
Weight: 1500 lbs
*Carbide insert tooling sold separately
Specifications
Specifications
| Laguna Tools Raised Panel Master 5 MDM2050-0148 | |
| APPLICATION | Wood Working |
| Brand | Laguna Tools |
| HORSEPOWER | 10 HP |
| POWER SOURCE | Electric - Corded |
| PRODUCT TYPE | Tools/Machinery |
| TOOL TYPE | Shapers |
| VOLTAGE | 208V-240V 3Ph |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

