Laguna Tools Industrial Dust Collector, X|Flux: 10HP MDCXF102203
Laguna Tools Industrial Dust Collector, X|Flux: 10HP MDCXF102203
Low stock
Couldn't load pickup availability
Details
Details
MDCXF102203, Laguna X|Flux: 10HP Industrial Dust Collector
The T|Flux series from Laguna starts to get serious. The Titan cyclones are geared towards clients who desire a single central unit for the entire shop. The T|Flux cyclones are equipped with a 10″ port that splits into 3 x 4″, allowing you to run a large diameter pipe system throughout your shop with drops to the individual stations.
All models are outfitted with smart drums which alert the user when the drums reach capacity. Automatic canister cleaning is controlled by a timer that turns on every work hour & runs 10 seconds clockwise & counter clockwise. The 1 micron canister has a huge surface area and filtrates 99.97% of particles ranging from 0.2 to 2 microns. Smart Drums comes standard with high quality casters and feature our unique quick disconnect design.
Features:
- Motor HP: 5 HP
- 220V, 22.4Amps, 3 Phase
- 40 AMP Recommended Breaker
- 60 Hertz
- 3450 RPM
- Switch Type: Sunken Radio Frequency Remote switch with LED full drum & LED Filter dirt detection
- Hand Held Remote Control: High Frequency
Specifications:
- Shop Setting CFM*: 2450
- Inlet CFM: 4295
- Max Static Pressure (Inches of Water): 12.1″
- Impeller/Fan Size: 16″
- Impeller Material: Steel
- Impeller Type: Radial Fin
- Balanced To: ISO 1940
- Inlet Diameter: 10″
- Drum Capacity: 54 Gal
- Octagon Drum: Low Pressure Suction
- Drum Collection Bag (Dia. x L): Plastic Bag (740 x 1300mmL)
- Canister Filter Type: Black 1 Micron
- Filtration Efficiency: 1.2-2 Micron @ 99.97%
- MERV Rating: 12
- Canister Diameter: 600mm (23.62″)
- Canister Length: 1200mm (47.24″)
- Filter Surface Area: 15m²/162ft²
- Canister Cleaning: Auto Clean (Gear Motor)/ Cleans every hour 10 sec clockwise, 10 sec counter-clockwise
- Canister Filter Lower Dust Collection: Plastic Bag (610 x 600mmL)
- Wheels: None
- US/CSA Approved: Yes
- Decibel Reading: 76dB(A)(@9.8ft)
- Machine Weight: 325 kgs/717 lbs
- Shipping Weight: 430 kgs / 948 lbs
- Shipping Dimensions (L x W x H): 75″ x 39″ x 80″
- Assembled Dimensions (L x W x H): 73″ x 39″ x 111″ (1845 x 989 x 2810mm)
Specifications
Specifications
| Laguna Tools Industrial Dust Collector, X|Flux: 10HP MDCXF102203 | |
| APPLICATION | Wood Working / Metal Working |
| Brand | Laguna Tools |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active

