Skil 1/4 x 5 In. Carbide Tipped Masonry Drill Bit MDB5103
Skil 1/4 x 5 In. Carbide Tipped Masonry Drill Bit MDB5103
Couldn't load pickup availability
Details
Details
SKIL 1/4 x 5 In. Carbide Tipped Masonry Drill Bit : SKIL (MDB5103)
Set anchors, drill pilot holes, and power through brick, cinder block, concrete, and other masonry with the SKIL 1/4 In. Carbide Tipped Masonry Drill Bit. This 1/4-inch masonry drill bit features a dual-cutting carbide tip that optimizes drilling speed while retaining its edge. The bit features a split point tip optimized for speed and precision while dual flutes allow for fast debris removal without slowing or bogging down when cutting through brick and concrete. The masonry bit can be used in both hammer and rotary modes. Its 1/4-inch hex shank provides superior grip with a three-jaw chuck or typical hammer drill while allowing compatibility with impact drivers. Heat-treated for extra strength, the shank and body allow the bit to withstand the abuse of drilling through masonry like block, concrete, and more when used in hammer mode. The bit is clearly labeled with bold print so it can be easily identified-no straining to read a tiny hairline imprint. Power through your next masonry project confidently with the SKIL 1/4 In. Carbide Tipped Masonry Drill Bit.
Features:
- DUAL FLUTES-Allow for removal of debris and particulate that can slow and bog down bits when cutting through brick and cinder blocks
- HEX BIT-Optimized for use with hammer drills and impact drivers, 1/4-inch hex shank provides superior contact for limited slipping
- CARBIDE-TIPPED-Two distinctive carbide-tipped cutting edges allow the bit to cut faster, more efficiently, and stay sharper longer
- SPLIT POINT TIP-Optimized for speed and precision, the split point tip guides the bit into masonry material upon contact
- IMPACT BIT-Strong shank and body allow the bit to withstand the abuse of drilling through hard materials like block and cement when used as an impact bit
- CLEAR LABELING-Bold print for easy bit identification, no straining to read a hairline imprint
- HEAT-TREATED-Hardened for bit strength and designed to stay sharp longer
Specifications:
- Bit Type — Hammer drill bit
- Bit Size — 1/4"
- Bit Length — 5"
- Maximum Drilling Depth — 3-1/4"
- Shank Type — 1/4" HEX
- Material — Carbide-tipped alloy steel
- Coating — Sandblast rust-resistance
- Package Quantity — Individual
- Case Type — 1-piece
Includes:
- 1-piece hex shank carbide tipped masonry hammer drill bit:
- 1/4"x5"
Specifications
Specifications
| Skil 1/4 x 5 In. Carbide Tipped Masonry Drill Bit MDB5103 | |
| Brand | Skil |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active
