Bosch Pro+Guard Drilling Dust Solution Kit, 9 Gallon

The Bosch GXA3-01L PRO+GUARD Drilling Kit features a HEPA filter, fleece filter bag and other accessories to upgrade the VAC090-series dust extractor. The VF130H HEPA Filter captures 99.97% of particles 0.3 microns and larger, and it has a low-stick surface to enhance the filter-cleaning process. It helps users move toward compliance with the OSHA respirable crystalline silica dust regulation. The VB090F Fleece Filter Bag acts as a preliminary filter, and the port cover securely closes to keep the dust inside during disposal. The filter and fleece bag are for use in dry applications only. The HDC200 dust-collection attachment for concrete drilling is optimized for drilling diameters from 5/8 In. to 1-3/8 In. It has two air chambers: one for drilling bit to pass through to extract dust, the other to maintain suction to the wall. The L-Boxx-3 tool carrying case (part of the L-Boxx tool-storage system) is also included. The case integrates with the dust extractor for a mobile workstation.

Features:

• Convenient update package - created to help VAC090-series dust extractor users move toward compliance with the OSHA respirable crystalline silica dust regulation; includes HEPA filter, fleece filter bag, dust-extraction attachment and carrying case
• Works with Bosch PRO+GUARD dust solutions - an end-to-end dust-collection system that helps users move toward OSHA Silica Table 1 dust compliance
• HEPA filter - captures 99.97% of particles larger than 0.3 microns
• HEPA filter's enhanced low-stick surface - improves the filter-cleaning process
• Fleece dust filter bag design - works as a preliminary filter and a secure way to capture debris and dust to increase the life of the main filter
• Dependable port cover on fleece bag - securely closes opening of the filter bag and keeps the dust and debris inside during the disposal process

Specifications:

• Handle: Yes
• Latches: Yes
• Material: High Density Plastic
• Height in: 10"
• Width in: 14"
• Weight: 4.8 lb

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.