Bosch 10 in. Jobsite Table Saw with Gravity-Rise Wheeled Stand

The Bosch GTS15-10 10 In. Jobsite Table Saw with Gravity-Rise Wheeled Stand delivers both professional rip capacity and outstanding portability to get the job done. The powerful 15-Amp saw delivers outstanding productivity for tough rip-cutting and cross-cutting jobs. It features electronically regulated speed to help maintain speed under load. The Rack and Pinion rip fence is engineered for great ease-of-use and allows for easy micro and macro adjustments with a hand knob, without having to tap and knock the fence into place. The lighter GTA50W Gravity-Rise Wheeled Stand has 8 in. treaded rubber-composite tires and foot release pedal for easy set-up and transport. It is jobsite-ready with heavy-duty construction. The Smart Guard System features a three-position adjustable riving knife, anti-kickback pawls and non-obstructed-view barrier guard assembly. The table saw provides a 32-1/8 in. rip capacity and 4x4 single cut capacity. With its durable open frame design, powerful motor, easy adjustments and portability, this table saw offers the worker an easy and convenient cutting solution for any jobsite.

Features:

• 15-Amp saw with 3,800 rpm for rip-cutting and cross-cutting of fine and hard wood materials
• Convenience brake – helps blade stop in approximately three seconds, increasing productivity
• Clampzone™ areas – allow tabletop to be used as a light-duty, secondary work surface
• Open frame design – equipped with open frame roll bar and lightweight construction for durability
• Soft-start circuitry – manages intensity of motor start-up and minimizes the possibility of tripping a circuit breaker
• Electronically regulated speed – helps maintain speed under load
• Portability – works seamlessly with the included lighter GTA50W Gravity-Rise Wheeled Stand for easy jobsite mobility, with single-action setup and take down
• Rack and pinion rip fence – features color-coded index pins that correlate with matching color-coded scale for easy adjustments by hand dial
• Smart Guard System – riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent blade contact while allowing an unobstructed view of the cut
• On-tool storage – stores the rip fence, miter gauge, Smart Guard System, hex wrench, blade wrench and push stick on the tool

Specifications:

• Amperage: 15
• Arbor (in): 5/8
• Bevel Angle Range: -2 to 47 degrees
• Blade Diameter (in): 10
• Dust Blower: Yes
• Height (in): 13.53
• Length (in): 28.1
• Max. Bevel Capacity (°): 47
• Max. Depth of Cut at 45 Deg. (in): 2-1/2
• Max. Depth of Cut at 90 Deg. (in): 3-9/16
• No Load RPM: 3,800
• Rip Capacity - Left (in): 14.125
• Rip Capacity - Right (in): 32.125
• Voltage: 120V
• Weight (lbs.): 91
• Width (in): 27.8
  

Includes:

• (1) GTS15-10 10 In. Jobsite Table Saw
• (1) GTA50W Gravity-Rise Wheeled Stand
• (1) 10 In. Carbide-Tipped Saw Blade
• (1) Miter Gauge
• (1) Barrier Guard Assembly
• (1) Anti-Kickback Device Set
• (1) Rip Fence with Flip-Over Fence
• (1) Table Insert
• (1) Push Stick
• (1) Blade Wrench
• (1) Hex Wrench

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.