Stationary machines like hollow chisel mortises and slot mortises occupy a large amount of floor space in your shop, are expensive to purchase, require a lot of setup and maintenance, and force you to bring the material to the tool. Festool has taken the revolutionary concept of the DOMINO joiner and made it larger with the DOMINO XL Joiner. The DOMINO XL offers a more elegant solution to the challenge of large-scale joinery. The amazingly simple to use, fast, and accurate DOMINO XL now complements the capabilities of the original DOMINO DF 500, with a maximum tenon size of about five and a half-Inch in length (140 mm). No job is too big for the DOMINO XL, with an expanded range of thicker and longer tenons you can quickly and precisely join massive slabs, doors and gates, or construct the most durable of tables and beds. With the DOMINO XL, you’ve got a system light and nimble enough for use anywhere in the shop or on the jobsite. When the work piece is too large to come to the machine, this makes all the difference. Precision placement of solid hardwood tenons guarantees not only a perfect fit, but a finished product that will last for generations.

Festool Beech Tenons are made from all-natural, solid hardwood for strength and stability. The Beech Tenon serves as a true floating tenon in mortise and tenon applications such as furniture, cabinetmaking, casing and frame work. The flat, elongated design will not rotate, ensuring perfect alignment for both edge and face gluing. Suitable for both plywood and solid wood applications, the dense beech tenon will not expand or telegraph through material, leaving you with clean, flat, and consistent surfaces. The DOMINO Tenon is embossed with glue pockets, and is approximately 2mm shorter than nominal length, allowing space in the mortise for glue. Tenons come in removable plastic bins.

32 Anchor Bolts SV-AB D14, 16 Connector Double Bolts SV-DB D14, 128 Half-Shells for the Anchor Bolts and Connector Double Bolts, 32 Expansion Anchors SV-SA D14, 64 transverse anchors SV-QA D14 including studs, hex wrench 4 mm for tightening screws, 64 Half-Shells SV-V D14 for widening 32 cross anchors, 32 cover caps each in silver, dark brown and light brown (SV-AK D14 slr, SV-AK D14 brn1 and SV-AK D14 brn2), 32 DOMINO Tenons D14x75 beech.

Break through the limits of shop-built pieces and on-site construction with the use of knock-down hardware. Create, build, and finish full-sized constructed pieces, then quickly disassemble, move, and then reassemble with only a hex wrench.

DOMINO fasteners work with the DOMINO XL (DF 700) Joiner to create flat or corner joints. Corner and flat connectors provide simple and quick connections without the need for templates or complex measuring. Colored cover caps provide high-quality corner connection appearance. Available as a set and individual components. Requires 14mm cutter.