9680213, Palmgren 9inx20in Bench Combination Engine Lathe & Vari Speed Mill

Palmgren’s combination 9˝ bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines. Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance. The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.

Specifications:

• Spindle Speed: 125 to 2000 RPM
• Distance Between Centers: 20"
• Spindle Taper: MT3
• Tailstock Taper: MT2
• Length: 49
• Motor: 5/8HP - 115V - 10Amps -1PH - 60Hz
• Warranty: 3 Year
• Height: 33-1/2"
• Compound Slide Travel: 3-9/16"
• Spindle Hole: 1"
• Chuck Size: 5"
• Tailstock Sleeve Travel: 2-1/2"
• Mill Weight: 132
• Z-Axis Travel: 10-1/2"
• Spindle Holding Fixture: MT2 3/8"-16 Draw Bar
• Spindle Travel: 2"
• 4 Position Tool Post Height: 3-3/4"
• Max Turning Diameter: 9-7/8"
• Low Range: 100 - 1500
• Lathe Weight: 452
• Distance Between Center and Compound Table: 3"
• Gear Stages: 2
• Drilling Capacity: 5/8"
• Table Width: 4-3/4"
• Lathe Motor: 1PH - 115V - 13.6 Amps - 1PH - 60 Hz
• High Range: 200 - 3000
• Working Radius: 6-3/4"
• Table Length: 15 3/4"
• Y-Axis Travel: 4-21/64"
• X-Axis Travel: 6-1/4"
• Travel Top Slide: 19-1/2"
• Pitch - (metric/inches) (TPI): 0.2 - 4 / 8 - 56
• T-Slot Size/Distance/Qty: 3/8"
• Miling Capacity of End Mill Cutter: 3/4"
• Swivel of the Milling Head: + / - 90 degrees
• Depth: 23
• Number of Speeds: 6
• Milling Capacity of Insterted Tooth Cutter: 2-1/2"
• Longitudial Feed: 0.003" 0.004" 0.006" 0.008 0.012" 0.016"
• Height of Centers: 4-3/4"

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.