Fein 2-5/16"x1" SLUGGER HSS cutter 63134587001
Fein 2-5/16"x1" SLUGGER HSS cutter 63134587001
Low stock
Couldn't load pickup availability
Details
Details
63134587001, Fein Slugger S2312-.75S, 2-5/16" x 1" HSS Nova Annular Cutter
The Jancy Slugger uncoated, high-speed steel metric annular cutter with a 1" depth and a 3/4" annular cutter shank is used to generate metric-sized through holes as deep as 1" in a variety of materials, with the best performance in mild steel and structural steel. An annular cutter removes only the circumference of a through hole (which extends through the workpiece), releasing the centre material as a slug once the hole has been cut. The tool's center-free design saves energy and reduces cycle time: the operator may produce holes three to five times faster than with a typical twist drill, which must turn the entire hole into chips. Furthermore, the many cutting edges of this tool can produce a precise, burr-free hole that reduces the need for secondary operations such as pre-drilling and reaming.
Slugger Advantages:
- Drills holes three times faster than twist drills
- Drills unique and curved surfaces
- Allows overlapping cuts in existing holes
- Produces high quality reamed holes without burrs
- Coolant fed cutting edges
- Produces solid slug.
- Reduces the size of the machine and the power required
- Made with C.N.C. Accuracy
- Resharpening of cutting edges possible
- Eliminates time consuming and costly pilot and counterbore drilling
Specifications:
- Manufactured from high speed steel (M2) for long life
- The 3/4 in. Weldon shank allows for use with other competitive magnetic drills.
- Requires Pilot Pin 16003
- Suitable for aluminum and other non-ferrous metals
- High-Speed Steel 1" Depth 3/4" Weldon Shank
- Made in the USA
Specifications
Specifications
| Fein 2-5/16"x1" SLUGGER HSS cutter 63134587001 | |
| APPLICATION | Contracting & Remodeling / Wood Working / Metal Working |
| Brand | Fein |
| CONSUMABLE TYPE | Drilling Bits |
| DEPTH | 25 mm |
| DIAMETER | 2 5/16 in |
| PRODUCT TYPE | Consumables |
| TOOL SUB-TYPE | Drills - Magnetic Drills |
| TOOL TYPE | Drills |
Shipping & Returns
Shipping & Returns
Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.
We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.
• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.
Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.
We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.
Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.
Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.
Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Custom add to cart button styles are active
