63134190114, Fein Slugger SL750CTN, 3/4" X 2" HSS Supra Annular Cutter

The Jancy Slugger is made up of Cobalt steel with titanium nitride (TiN) coating, 2” depth, and a 3/4” annular cutter shank is used to create through holes as deep as 2” in a range of materials, with best performance in hard-to-machine materials as well as mild steel and stainless steel. An annular cutter removes only the circumference of a through hole (extending through the workpiece), releasing the central material as a slug when the hole has been cut. The center-free design of the tool results in energy efficiency and reduced cycle time: the operator can produce holes three to five times faster than with a conventional twist drill that must convert the entire hole into chips. In addition, this tool’s multiple cutting edges can create an accurate, burr-free hole that minimizes the need for secondary operations such as pre-drilling and reaming.

Features:

• Center-free design creates through holes by cutting only the periphery of the hole for greater productivity in comparison to twist drills
• Multiple cutting edges create a high-quality hole that minimizes the need for secondary operations such as pre-drilling and reaming
• Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting
• High-speed steel is compatible with a variety of materials
• 3/4" annular cutter shank can be used in a drill press, mill, or lathe

Specifications:

• Cutter Diameter: 3/4"
• Cutting Depth: 2"
• Shank Diameter: 3/4" 
• Made from Cobalt steel TiN coating for improved service life and greater lubricity.
• 3/4 in. Weldon shank allows cutter to be used with other competitive magnetic drills

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.