55233022, Edwards 55 Ton Ironworker 3 Phase, 230 Volt,10" Brake

The Edwards 55 Ton JAWS Ironworker is well suited to fit the needs of any fab shop, large or small. Standard features include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a universal open tooling station designed to accept optional Tooling Accessories.

Includes:

AC1051, Edwards 10" Brake with 4-way Die for 55T, 75T, 100T, 110 Elite

Precise, Repeatable Bends Brackets, frames, pans and tanks are just a few of the applications appropriate for the Edwards Brake Tooling. This length brake is designed to work with the 55 ton, 65 ton, 100 ton Deluxe, 120 ton, and 110-65 Elite Dual Operator Ironworkers. Brake Tooling includes a standard punch and a four-way die that allows for 1/16", 1/8", 3/16", and 1/4" material to be bent to a 90° angle. The bottom brake die is held with brackets that easily bolt to the mounting table. Repeatable bending is achievable with the combination of Brake Tooling and the Ironworker's electric stroke control.

Features:

• Four Available Workstations
• Universal Open Tooling Station
• Electric Stroke Control
• ANSI B11.5-1988R(02) Compliant
• ETL/UL Approved Controls

Specifications:

PUNCH

• Rating 55 Tons
• Max. Capacity 1-1/16" Dia. in 5/8" A36 (65,000 PSI Tensile)
• Stroke 1-1/4"
• Throat Depth 7-1/2"
• Open Height 8-1/8"
• Shut Height 6-7/8"
• Work Height 36-9/16"

FLAT BAR SHEAR

• Max. Capacity 3/8" x 14" 1/2" x 12" 3/4" x 4"
• Max. Round 7/8"
• Max. Square 7/8"
• Work Height 34-1/2"

ANGLE SHEAR

• Max. Capacity 3" x 3" x 3/8" 4" x 4" x 1/4"
• Work Height 39-7/8"

OPTIONAL COPER NOTCHER

• Max. Capacity 2-1/2" x 4" x 5/16"
• Work Height 39-1/2"

OPEN STATION

• Throat Depth 11-3/16"
• Open Height 8-1/8"
• Shut Height 6-7/8"
• Stroke 1-1/4"
• Work Height 34-1/2"

GENERAL SPECIFICATIONS

• Standard Motor 5 HP 3~ 208 V or 230 V 1725 RPM 14 A
• Optional Motors 5 HP 3~ 460 V 1725 RPM 7 A
• 5 HP 3~ 575 V 1725 RPM 6 A
• 5 HP 1~ 230 V 1725 RPM 23 A
• Hydraulic Pump 3-1/2 GPM - 1 Stage
• Valve Pressure 2500 PSI
• Reservoir 7 Gallons
• Cylinder 2-1/2" Ram

DIMENSIONS

• Height 55-1/4"
• Width 44-3/8"
• Depth 36-1/8"
• Shipping Weight 2480 lb

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.