495209, Festool 197" Clear Splinterguard (5000mm)

Festool FS Guide Rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right length for straight, splinterfree cutting in just about any application. The integrated splinterguard is a critical guide rail system component, and after some time and heavy use, will need to be replaced. Replace your splinterguard as needed to ensure perfect alignment of your guide rail to the cut line, and to protect against tear out, on cuts both with the grain and across. Though you should expect many cuts from your original splinterguard, its life expectancy is heavily dependent on your application. Keep your cuts perfectly splinterfree by periodically replacing your splinterguard, especially if you are switching between blades, or using the guide rail with more than one saw. Clear splinterguard enhances visibility of cut line. Includes one 197in (5000mm) Clear Splinterguard.

• Clear splinterguard enhances visibility of cut line
• A fresh splinterguard can be matched perfectly to the saw blade, providing precise alignment to your cut line, saving valuable set up time
• A fresh splinterguard is the best protection against tear out, for cuts both with the grain and across
• Change your splinterguard if you are switching between different kerfed blades or different saws, ensuring a precise match

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.