45799, Amana Rectangular Groove for Thick Aluminum Composite Material (ACM) Panels, 15/16 Radius x 7/16 x 5/8 Dia. x 1/4 Inch Shank Carbide Tipped Router Bit

These bits are widely used as cladding for many diverse applications such as office buildings, hospitals, convention centers, airports, hotels. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.

Designed for cutting and scoring aluminum sandwich materials including:

• Aluminum, Clay, Zinc & Wood Composite Panels
• Aluminum Composite Materials (ACM)
• Aluminum Composite Panel (ACP)*
• ALPOLIC® Copper Composite Material (CCM)
• Alucobond®
• Alupanel®
• Dibond®
• Durabond**
• e-panel™
• Etalbond®
• Phenolics
• Plastic/Acrylic
• Plexiglas®
• Titanium Composite Material (TCM)
• Wood

Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage. **Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.

Specifications:

• Tool No. 45799
• Diameter (D) 5/8
• Radius (R) 15/16
• Cutting Height (B) 7/16
• Shank (d) 1/4
• Overall Length (L) 2
• Type Rectangular Groove (for thicker panels)
• Flutes 2
• Feed Rate IPM 120"
• RPM 18,000 - 24,000

Shipping: Beaver Industrial Supply offers free shipping on orders over $199, with the exception of Sawstop and Laguna, which require additional fees to be collected. Other exceptions apply as noted on product pages.

We reserve the right to determine the fastest and most cost-effective manner of transportation for all orders that qualify for free shipping. Our shipping carriers cannot deliver to PO box or U.S. military post office box addresses, such as APO and FPO, so we require a physical street address for delivery. We use USPS, which typically takes 2-8 days for delivery, depending on your location, for smaller items and UPS Ground for all other ground shipments under 150 pounds.

• Returns: We accept returns and exchanges for a fee up to 30 days in unopened, new, and unused condition in the original packaging. Exceptions apply.

Please note, NO REFUNDS will be given on any new, used, or damaged item if it is not returned in the original packaging, no matter what condition the packaging is in. If the item qualifies for free shipping, you will be charged the original shipping cost and are responsible for shipping the product back with the shipping carrier of your choice.

We must receive the item undamaged. We recommend you package it accordingly and purchase insurance for higher-priced items to ensure you receive the full refund minus any incurred fees as applicable. We reserve the right to refuse the return of accessories.

Because items are your responsibility until they reach us, we recommend that you send the parcel using a delivery service that insures you of the value of the goods. Return shipping is at the customer's cost. At Beaver Industrial Supply’s discretion, delivery charges can be refunded if the goods are defective.

Returns require a return authorization number. Please call customer service at 314-773-5999 or submit a customer service inquiry to start the exchange or return process and receive an authorization number.

Machinery too large for parcel shipment (palletized or crated) is only returnable if there is a material defect that cannot be resolved by replacing components.